Question about Yamaha Audio Players & Recorders

Yamaha Natural Sound AV Receiver Model # HTR-5450 Monoprice Powered 8 Subwoofer Model # MSUD-A082 Is there away to check the subwoofer output signal , to confirm if the signal is correct.

1 Answer

Ambrosia Heart

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Loyalty:

Visited the website for 30 consecutive days.
Expert
130 Answers

"Is there away to check the subwoofer output signal , to confirm if the signal is correct." Yes.
(1)Input 1KHz sine wave downloaded from internet into subwoofer.
(2)open the subwoofer
(3)connect an oscilloscope to the speaker output.
(4)Probe to +ve terminal. -ve terminal to earth clip.
(5)Observe any discrepancy.

Posted on Jun 03, 2019

6 Suggested Answers

6ya staff

2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Anonymous

36 Answers

SOURCE: Connecting a Yamaha VX7 Subwoofer on my Yamaha HTR 5730 AV Receiver

Hello srqwrk,

You can connect the VX7 to the 5730 using an RCA Y cable like the one shown in the picture below. You get your one connection for the receiver and 2 for the VX7. These are available at any electronics store. Remember that the cable should be long enough to go from the receiver to where subwoofer will be placed.
Hope this helps. Let me know.

cancerags

Posted on Jan 01, 2008

ravi chavan

238 Answers

SOURCE: No Output Subwoofer

hi, ya , some recievers have its setup where u have to enable the sub out,, check the menu carefully, also the player menu if the sub is on or off, let me know..

Posted on Jan 12, 2008

Anonymous

1 Answer

SOURCE: KLH SUBWOOFER - RECEIVER-SURROUND SOUND -5 SPEAKER HOOK UP INSTRUCTIONS

Had the same problem with KLH E-10D Preamped Subwoofer. Afte brief research, I found the problem was with my Pioneer VSX-D509S reciever settings, not the subwoofer. If you have the same reciever, you can go to the pioneer website to download specific model owner's manuals.

http://www.pioneerelectronics.com/PUSA/Support/HomeEntertainment/ch.AV-Receivers.Archived?vgnextfmt=Archived

Select your Pioneer reciever model and it will give you an option to download the pdf manual. Hope this helps.

Posted on Jan 24, 2009

Mike Lynch

93 Answers

SOURCE: JVC - Problem connecting a Powered Subwoofer to a Receiver

Have you set speaker setup configuration to SUBWOOFER YES? Also check SUBWOOFER OUT ON/OFF button on the front panel.

Posted on Feb 21, 2009

wwlvictoria

1001 Answers

SOURCE: Playstation 3 audio connection into Yamaha HTR-6040 AV Receiver

Excellent Bluetooth Receiver,stable connectivity and remarkable signal stability.
Smooth call conversation and non-stop and clear music streaming creates enjoyable listening experience.

Amazon com Charm sonic Wireless Portable Bluetooth 4 1 Receiver Wireless...

Amazon com Charm sonic Wireless Portable Bluetooth 4...

amazon.com

Amazon com Charm sonic Wireless...

Posted on Jan 17, 2017

Add Your Answer

Upload

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

I am unable to find the owners manual for the Teac MC-DV100 SuybWoofer

For almost any set-top box, there isn't a sub-woofer output. Without that output (it would be labeled on the STB), you can't hook up a subwoofer directly to it.

HOWEVER, the model number you give isn't just a subwoofer: it's a whole sound system with a subwoofer attached to it. If you have the whole sound system, you just hook the STB's audio output to the amplifier's "Aux Input" (it might also be called "line input").

If your model doesn't have that (can't tell from the web), you'd have to buy an "AV Receiver" that has at least a 5.1 set of outputs. These start at maybe $150 new, $50 on eBay. MAKE SURE YOU BUY A RECEIVER WITH A "powered" SUBWOOFER OUTPUT!! You connect the receiver to the STB, and the subwoofer to the receiver.

Jul 15, 2015 | Teac Audio Players & Recorders

1 Answer

My a102jamo surround sound speakers and working

The Jamo speakers need an AV Receiver to drive them properly. The TV doesn't have the correct outputs nor does it have the power required.

The Jamo kit consists of a powered subwoofer ans 5 small surround speakers. Each surround speaker needs to be powered by the speaker output from an an AV Receiver. The subwoofer should also be connected to the receiver, but the connection is a phono/RCA lead from the receiver's "Sub Out" socket.

Your TV connects to the AV receiver via the Optical out.

Aug 31, 2014 | Audio Players & Recorders

1 Answer

"I'm trying to use the Bose PS28 III Powered Sub woofer for a second zone on my Yamaha HTR 5150 receiver. What hardware do I need for the connections?"

as there is No AC Adapter on the bose you\'ll need to check the YAMAHA for a powered output here is the manual the the YAMAHA

Jan 13, 2013 | Bose Lifestyle Ps28 Iii Subwoofer Dual...

1 Answer

I have a Yamaha HTR 3063 reciever and I just got a PSW 2000 Kef sub and I can't get the sub to WORK NO MATTER WHAT I DO PLEASE HELP

That is a potentially great combination. I have a Yamaha receiver but I am not familiar enough with Kef to know but is it possible your receiver expects to be connected to a powered sub. Are you sure the Kef works by itself? Have you checked to see whether the receiver subwoofer output works with another speaker? Could receiver mode selection be a factor? My Yamaha switches various functions on and off depending upon your preference.

For what it's worth, the troubleshooting section of my Yamaha manual says a subwoofer no sound problem can be caused by selecting MAIN LFE/BASS OUT on the SET MENU when Dolby or DTS material is being played or selecting SWFR when a 2-channel source is being played. Something has to work!

Sep 10, 2012 | Audio Players & Recorders

1 Answer

HOW TO HOOK UP SDAT 8

You need a long enough subwoofer cable ( Male connectors on each end ) and connect it to the female RCA input on the sub and the rear of your receiver has an output labeled subwoofer out connect the other end of the cable there and you are good to go. Make sure both the receiver and the subwoofer are powered off when making the connections.

Feb 15, 2012 | Yamaha Audio Players & Recorders

1 Answer

Problem with a subwoofer output..

Check your settings in the Receiver Main Menu. Go to Speaker settings, then to Subwoofer, and select "Yes" or "On" or it may say "LFE or Both" choose "Both" Hope this helps. If you still have a problem, post a comment and I can help you some more

Aug 11, 2009 | Yamaha HTR-5730 Receiver

1 Answer

Speakers connection

There shouldnt be a problem with that at all. The subwoofer needs to be self powered. The Yamaha has a "Subwoofer Output" on the back. Just connect it there.

Apr 04, 2009 | Aiwa Audio Players & Recorders

2 Answers

Want to connect my RCA sub to my yamaha htr-5940 reciever

Subwoofer needs to be enabled through menu on Yamaha. LINE OUT might be turned off or Subwoofer volume set to low or off... (-db level) kinda thing...speaker wires are usually always live etc...

Feb 03, 2009 | Yamaha HTR-5940 Receiver

2 Answers

The subwoofer does not have sound. but everything is on and everythin works,the subwoofer is in there is just no sound comin from the subwoofer.

Please change the cable which goes from the subwoofer to the AV receiver. Buy one good quality cable this will sove your problem. As i was facing the same problem and i myself resolved the issue.

Dec 15, 2008 | Yamaha HTR-6030 Receiver

1 Answer