SOURCE: cannon pixma ip 3000 ink jet printer
Go here: http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct
Select the drop downs for Printer, Pixma iP Series, ip3000
On the next page, select the Drivers & Downlaods tab. Use the drop down box to select your OS (operating system).
In the Drivers box, click on the red link. On the new page, if the file name ends in "exe", there should be a checkbox near the bottom to select Automatic Installation Option. Check that and hit the I Agree button.
Hope that works for you.
SOURCE: Problem with the color - Canon Pixma ip 3000 Ink Jet printer
go 2 printing preferances and make shore all your setting are on normal or higher and try again
SOURCE: canon pixma ip3100 driver
Try this link:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=10238
this driver is applicable for model ip3100
PS, rate this solution...tnx
SOURCE: Installer cannon pixma ip 3000
You can download the said installer through this links:
http://software.canon-europe.com/products/0010094.asp
SOURCE: Printer does not power up
My Canon IP3000 would not turn. It turned out to be the Print Head. It had burnt out and gone short circuit. This caused the built in power supply to shut down, hence, the printer appears dead.
Now, how do you get the Print Head out when it is locked down on the left side (your right side if facing the printer)? Open the top lid and inside you will see a chrome sharft, about 10mm in diameter, that the Print Head slides along. Put you finger under this bar and lift it 3 to 4mm. It's under spring tension. The Print Head will also rise, releasing it from the lock. With your other hand, slide the Print Head to your left. You can now release the bar and move the Print head freely.
To confirm the fault, try to power up the printer with the Print Head removed. Don't forget to put the lock bar down first, to stop it hitting the cover when it tries to go home.
137 views
Usually answered in minutes!
×