I am looking for a schematic for a McCulloch Chain Saw Series SE2000

SOURCE: McCulloch Chain Saw Manual

Found all the mcculloch manuals you could ever want on mcculloch product information site. Its run by mcculloch an you put the product weather chainsaw or strimmer whatever an the type in the next collum an press download then print it off all very easy. My manual was in german so made up i found stumbled on this.

SOURCE: need owners maual for mcculloch power mac 6 chain saw

try my answer to the post on McCulloch pro/mac 10-10 chainsaw owners manual... posted by denniswick on Oct 03, 2008

SOURCE: I have a McCulloch 10 10 Automatic Chain Saw. What is the oil to

40:1 of two stroke oil roughly 2..5% 40 parts fuel to 1 part oil mixed Good Luck the Yeti

SOURCE: need to replace gas line inside mcculloch chain

You need to disassemble the case to get to the fuel tank. Pull out the plug fitting and replace the internals with new factory grade parts.

SOURCE: mcculloch 3516 chain saw, does not always start.

It must have spark, fuel and compression to run. Your task is to figure out which is missing.
Sometimes electrical components quit operating once beyond a certain temperature. Does it always start cold and become tempermental when warm?
IMO most hard start problems on a chainsaw with a good fuel delivery system are flooded.
Start Procedure
Cold:

1. Ignition on/off to on
2. Set compression release – optional step even if saw is equipped with a compression release
3. Pull (close) choke, set fast idle (done when choke closed on some saws); pull starter and listen for an attempt to start. once heard (usually two pulls; no more than 4)
4. Set compression release – optional step even if saw is equipped with a compression release
5. Push (open) choke pull starter until it starts. (usually first pull)

1. Ignition on/off to on
2. Set compression release – optional step even if saw is equipped with a compression release
3. Pull (close) choke, set fast idle (done when choke closed on some saws) - Don’t pull with choke closed.
4. Push (open) choke, pull starter until it starts. (usually first pull)