Question about Refrigerators
Without knowing your model# to know which fridge you have makes it difficult to tell you how to do this. Most models have the lower frame supporting the pan and it is not easily removed. It is also very possible to damage the pan if not done correctly so I normally never recommend someone do this! Once it crack, you need to replace it!
Posted on May 12, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
if you cant remove it then wash it unplug the refrigerator from ac outllet first then remove the carton cover in the back and you gona see the pan were the water is temporaly storege with a garden hose washing the pan and then clean the floor use or news paper around the refrigy is helpfull the water or so in the pan is evaporated with the hot of the compresor sistem that water come frome the freeser compartment....good luck and rate me
Posted on Jan 11, 2008
YOU MIGHT TRY TO UNCLIP THE COMPRESSOR AND MOVE IT OUT SLOWLY AS HOT TO KINK THE COPPER TUBING,ALSO MAKE SURE YOU USE CLAUK UNDER THE DRAIN PAN SO IT DOES NOT LEAK,HOPE THIS HELP,THANKS-MIKE
Posted on Jun 01, 2008
SOURCE: Cleaning drip tray.
I have just removed the drip tray from my fridge freezer and it was relatively easy.
Do not remove the compressor unit.
The drip tray is held in place by a metal clasp which is welded to the top of the compressor. The clasp is a flat piece of metal which must physically twisted to align with the key way in the plastic drip tray. I used thin pair of pliers to grip the clasp and twist it clockwise to line up with the tray key way. The tray then has to be carefully manouvred off the compressor so as not to cause damage or spill it foul smelling contents. This I managed to achieve fairly easily.
Clean out and install then twist the clasp to clamp the tray into position. I don't know what would happen if you didnt lock the tray back in position as it does not seem capable of falling off on its own and it would be easier to remove next time.
Hope this makes sense
Posted on Mar 05, 2009
Hello. yes. The tray can be slid out. Before you do this, unplug your fridge. Then remove the lower front grill, it just lifts off. Grasp the tray and gently pull it forward. J.
Posted on Jun 22, 2010
SOURCE: How do I remove the
we had a really bad smell coming from the back of our westinghouse aurora. and yes found it to be emanating from drip tray at the back. To remove this we had to undo 4 clips at the base of black motor thingy, that the plastic drip box sits on. Then we were able to lift whole thing a bit ,(10mm up and 50mm out, approx) so we could tilt everything forward and sweeze and wiggle tray out. then cleaned with bleach. also we unblocked hole inside fridge that allows water to drip into drip tray at back.
Posted on Sep 28, 2011
Tips for a great answer:
Jun 01, 2011 | Westinghouse Refrigerators
Jun 22, 2010 | Refrigerators
Apr 30, 2010 | Maytag MSD2756G Side by Side Refrigerator
Nov 02, 2009 | Refrigerators
Oct 31, 2009 | Miele KF7642S Bottom Freezer Refrigerator
Sep 24, 2017 | Kenmore 44273 Side by Side Refrigerator
Sep 30, 2008 | GE Refrigerators
Jun 14, 2008 | Whirlpool GD2SHGX Refrigerator
Mar 10, 2008 | Refrigerators
71 people viewed this question
Usually answered in minutes!