How many btu is feeder window unit serial no A6Q10F2A

It sounds like you need an electronics expert. There are some general reasons here. One problem can be the vibration causing wires to chafe through.

What To Do If Your AC Has Blown A Fuse?

Air Boca https://www.airboca.com > what-to-do-if-your-ac-has-...
Nov 14, 2022 - Additionally, a common cause of blown fuses (and trips to the AC ... on the fuse, you can inspect the access panel of your air conditioner.
"); background-repeat: repeat-x; display: inline-block; overflow: hidden; position: relative; background-size: 14px 11.4px; height: 11.4px; width: 68px;">"); background-repeat: repeat-x; display: block; background-size: 14px 11.4px; height: 11.4px; width: 62px;"> Rating: 4.7 · ‎285 votes
Missing: Fedders ‎A6Q10F2A

Why Does My Air Conditioner Keep Blowing Fuses?

mcservice.com https://www.mcservice.com > blogs > air-conditioner-...
Apr 27, 2018 - An air conditioner with electrical issues can be a headache for homeowners. Read McAllister's blog post on what is causing your AC to blow ...
Missing: Fedders ‎A6Q10F2A ‎touch ‎pad

Why does my Central A/C Keeps Blowing its Fuse?

Stack Exchange https://diy.stackexchange.com > questions > why-does...
Sep 7, 2013 - Which fuse is blowing? There are 4 common locations for fuses: main fuse panel for air handler, main fuse panel for condenser, local disconnect ...
6 answers · 1 vote: Long-term darkening of a fuse on a high-draw circuit like an AC is not unusual. How

Usually the front is held on with screws on the sides of the unit. I would check behind the filter screen trim plate as well. I would be surprised if the front is just snap locked on.

A6Q10F2A: 10,000 BTU

It is an 8000 BTU, I have one myself. The model A6Q08F2A

The Fedders A6Q10F2A, is a 10,000 BTU

that is a 10000 btu unit and a good rule of thumb to go by when 'sizing' a unit is 12000 btu for every 600 sq ft of cooling space (if the place is well insulated) or 400 sq ft (if not well insulated).
So, you have a 10000 btu unit which is 5/6th of 12000 btu - so - can reasonably expect that unit to cool approximately 500 sq feet.
In other words the room it's in now could be only - say - 300 sq feet (and well insulated) - in which case the AC unit is cooling it - well.
However, if you try to cool a 800 sq ft room - it will not work as well.
Hope this has helped.

Hi,
Pull off the front cover and then the filter...usually reight behind there is a sticker with the BTU outpit of the unit...model number, serial number, etc...

heatman101

BTU means "British thermal units" and is a measurment of cooling and heating capacity. Other units are Kw "Kilowatts", and HP "Horse Power".
To convert
Multiply by
To obtain
kW
1.341
hp

kW
3,413
Btu/hr
hp
2,545
Btu/hr

front panel has one phillips screw in it. remove the air filter and you will see it. Once you remove the screw, grasp the lower front sides of the cover, where the plastic meets the metal, and gently pry it outwards and towards you. there are plastic clips that hold the cover in place. One on each lower side and three on top.

AC Type Thru-Wall/Window Cooling Capacity 10000 BTU/hr Energy Efficiency Rating 9 EER Fan Speeds (Cooling) 3

Hi!!! if you have a run capacitor change it..If it still dont work then you have a bad compressor..good luck.