At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Fit-loop exercise band is a type of exercise band that's used to work the lower body muscles: legs, hips, and glutes. If you're looking to target upper body muscles and core muscles as well, fit-loop exercise band is not for you and you should get a different type of exercise band (figure-8, fit tube).
In short, no. But just do as many other do and use a short rubber band. Lay the middle of the band across the inside of the strap, and then pass the snorkel tube through the two resulting loops either side of the strap.
This is a common problem with all watches with rubber or leather straps, not just with Ironman. In fact, there isn't anything our experts can do, as the responsibility is entirely on watch band producers. We just can hope that when the nano technologies will develop to the higher level, there will be a possibility to produce brand new materials yet unknown to human. These materials will have no wear and tear at all and everyone will be happy with forever lasting bands, shoes, e.t.c. For a while we can only wait. By the way - if you will buy Casio, it will make no difference, as all watch straps are made by using same technologies and chemical formulae. One of my friends went very upset for the same reason as you, so, I did find a solution for him using piece of scrapped copper pipe. This is how you do that: Measure that small loop of your watch band and find or buy the piece of copper pipe of same size. Cut off 1cm piece of the pipe and file off any imperfections, then polish it if needed. Get an old leather belt, fold it into half and put the copper ring in between, then flatten it with hammer. Do it step by step, always checking that there is enough space for band and band end to go through the newly formed copper loop. When flattened enough, spray the loop with band matching paint and leave to dry. Respray if necessary. Now you are done and this loop will last very long time.
Rate me, plz.
Ok - I will answer my own problem seeing as though I have now fitted it!
1. remove door (2 screws)
2. There is a tensioned wire loop holding the front part of the boot seal in position. - prize off the plastic cap at the 11 o'clock position, all will become clear and you will be able to remove the wire loop.
3. Remove top of washing machine (2 allen screws behind caps at the front.
4. Remove soap dispenser draw and any screws holding the front control panel and top of the door.
5. Remove bottom front plinth (just pull it off) underneath are a couple of screws holding the front panel part of the machine, remove these.
6. Remove front of machine giving you access to the steel band which locks the other end of the boot seal in position. Slacken this band right back using a nut-spinner screwdriver. Pull off the old boot and clean the lip ready for fitting of the new boot.
7. Fit new boot seal using a squirt of washing up liquid as lubricant if needed (mine didn't) to reseat the seal.
8. Refit and tension steel band.
9. Re-assemble front panel, ease boot back into front lip position then refit wire loop using a suitable pair of pliers/molegrips to crimp the retaining plastic cap back in situ.
hold fan belt with both hands as if stretching a rubber band.place one end of belt over a fan blade all the way down to the hub.loop the other end over as many blades as length allows.''leap frog'' over remaining blades as necessary.if that doesn't do,there should be 4 bolts holding fan hub to it's mount on water pump spindle
Do you know no one takes proper responsibilities about electric item, but you should need to check once so Oniline sites are good because you can get a new stack watches. Top Seller of Week 10 Discounted Watches 24 7
×