Question about Whirlpool Washing Machines

1 Answer

My Whirlpool front loading washer Model W10891955A is flashing: F3 followed by E1 What do I do to correct. I can't find that in my manual

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 1,234 Answers

Your drain filter is clogged. Take off the kick panel, 3 screws 1/4 inch. Make sure you have a shop vac ready or a lot of towels as there will be some water. #1. Always disconnect power to washer and turn off water to washer. Unscrew the cap on the filter, easy to find, since you have the kick panel off! Take everything out of the filter. You'll be amazed at what is in it. Also, clean up any water that has leaked in and around the washer. Screw the cap back on hand tight, put the kick panel back on, turn your water back on, plug it in and there you go! Maybe takes an hour.
Best to you.

Posted on Dec 27, 2018

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
ned_san_jose

Ned Halaweh

  • 240 Answers

SOURCE: Front load washer whirlpool code f3 e1

This is a pressure switch related problem. Take the top off and examine the pressure switch hose. It's usually a thin clear or black hose.

Posted on Oct 16, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Whirlpool Duet front load Washer Model WFW72HEDW error code E1/F3 will not drain or unlock


Unplug for 5 minutes then plug back in. This may reset code. You may have to push cancel / pause button for 3-5 seconds. If this doesn’t help, drain pump may have something obstructing it or may be defective

Oct 06, 2018 | Whirlpool Washing Machines

1 Answer

What does E2 error mean


Generic pump error

Error Code-control panel display "Err2" (Error 2, Error2) ' question ...

www.haier.com/za/help.../washing_machine/.../question/.../t20140313_209219.shtml
  1. Cached
  2. Similar
Mar 13, 2014 - Error message:Drain error, water can be not drained fully within the required drain time (controlled by PCB software). Reason 1. Pump filter is blocked. Solution 1. Please open and clean the pump filter. (Filter access door is on the bottom right, at floor level of the washing machine). Step 1.Push a flat blade ...

How To Fix Maytag Washer Beeping And Error Codes E2 and F3 Front ...

9k=? 5:23 https://www.youtube.com/watch?v=by94vOVmmhQ
  1. Similar
Mar 18, 2017 - Uploaded by Nancy Gurish How To Fix Maytag Washer Beeping And Error Codes E2 and F3 Front Load Washer Stopped, Repair Of ...

Washing Machine Error Codes - Front Load and Top Load Washers ...

https://removeandreplace.com/.../washing-machine-error-codes-front-and-top-load/
  1. Cached
  2. Similar
May 5, 2015 - F9 followed by E1 - (drain pump system error) F5 followed by E2 - (door will not lock) F7 followed by E1 - (motor drive error) "rL" - (remove load) Washer making error beeps - Door has not been opened and closed for at least 3 cycles. Washer beeps when HOLD TO START is touched - Door not closed

Mar 22, 2018 | Washing Machines

1 Answer

Front load washer whirlpool code f3 e1


This is a pressure switch related problem. Take the top off and examine the pressure switch hose. It's usually a thin clear or black hose.

Oct 16, 2017 | Whirlpool Washing Machines

1 Answer

E1 F3 on front load whirlpool duet washer


We are very sorry to hear this and we apologize for the inconvenience this has caused you. We would be glad to look into this if you could email us at Whirlpool_Digital@Whirlpool.com with your name, address, phone number and the model & serial numbers of the Washer.

Mar 02, 2017 | Whirlpool Washing Machines

1 Answer

Whirlpool washer F3 E1


F3E1 Error - Pressure switch/ sensor fault.

  • Your washer cannot detect the water level. Check the pressure sensing hose for kinks or blockage or the pressure sensor itself.
  • I won't leave you without a clue. Follow the link below and it will explain more than I can write here.
  • http://applianceassistant.com/Washer-Repair/Duet/Duet-Washer-Error-Codes
  • Jan 02, 2017 | Whirlpool Washing Machines

    1 Answer

    Oven won't heat flashes F2EO and 5D on


    List below does not apply to Whirlpool Models using the "Y" line in the products model numbers. Applies to models using 4 digit displays only.

    F0-E0 Analog to Digital failure
    Disconnect panel for 30 seconds
    Should the above error re-appears, replacement of the control is required.

    F1-E1 Defective ERC Replace ERC
    F2-E0 Shorted Keypad. Replace Keypad.
    F3-E0 Sensor or Sensor Fuse Open Replace Sensor or Fuse
    F3-E1 Shorted wire or Sensor locate short and correct it or replace Sensor
    F3-E2 Oven over heat Replace Sensor
    F3-E3 Cleaning Temp over heat Replace Sensor
    F5-E0 Door Error Check Door
    F5-E1 Door Latch Check Latch
    F5-E2 Door Switch Check Switch

    Below applies only to the two digit display models for the brands above.
    F0 Defective ERC Replace ERC
    F1 Defective ERC Replace ERC
    F2 Oven over heat Replace defective Sensor
    F3 Oven Sensor Open Check/Replace Sensor
    F4 Shorted wire or Sensor locate short and correct it or replace Sensor
    F5 Defective ERC Replace ERC
    F6 Problem with time keeping circuit Reset Time or cooking operation and check for proper ground.
    F7 Shorted or sticking button Clean button or replace ERC
    F8 Defective ERC Replace ERC
    F9 Door Latch Error Check latch and latch circuit

    Mar 20, 2016 | Ovens

    1 Answer

    Upper oven will not work


    F3-E1 Shorted wire or Temperature Sensor - locate short and correct it or replace Sensor.

    go to RepairClinic.com and enter your exact model # for a listing of replacement parts.

    Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

    Apr 14, 2010 | Whirlpool RBD275PD Electric Double Oven

    1 Answer

    I can't find my owner's manual and my Kenmore front load washer is stopping in the middle of the wash cycle and flashing F-30. Don't know what to do. The washer is one year old.


    First, see the following Sears Parts site.

    Enter your model number (###.#######) and you should see a list of sub-components.

    On many washers, to the right of the components is a place where you can click and see PDF versions of the owners manuals.

    If the Sears site doesn't have your owners manual, you may try looking at the following Whirlpool maintenance manual for front load washers.

    https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/07e2c9ebdcf04a3085256f38004f9b84/$FILE/WPWASHER1.pdf


    Oct 18, 2009 | Kenmore Washing Machines

    3 Answers

    F5E1 error


    Whirlpool-KitchenAid-Roper Appliances: Oven Fault Codes:
    >>Exception Note:<<
    Chart below does not apply to Whirlpool Models using the "Y" line in the products model numbers. Applies to models using 4 digit displays only.

    F0-E0 Analog to Digital failure
    Disconnect panel for 30 seconds
    Should the above error re-appear, replacement of the control is required.
    F1-E1 Defective ERC Replace ERC
    F2-E0 Shorted Keypad Replace Keypad
    F3-E0 Sensor or Sensor Fuse Open Replace Sensor or Fuse
    F3-E1 Shorted wire or Sensor locate short and correct it or replace Sensor
    F3-E2 Oven over heat Replace Sensor
    F3-E3 Cleaning Temp over heat Replace Sensor
    F5-E0 Door Error Check Door
    F5-E1 Door Latch Check Latch
    F5-E2 Door Switch Check Switch

    May 11, 2008 | Whirlpool RF378 Electric Kitchen Range

    Not finding what you are looking for?
    Washing Machines Logo

    Related Topics:

    364 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Whirlpool Washing Machines Experts

    Marvin
    Marvin

    Level 3 Expert

    85216 Answers

    Gerry Harvey
    Gerry Harvey

    Level 3 Expert

    1481 Answers

    jimorris77

    Level 3 Expert

    411 Answers

    Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...