This is what I have , Iwould like to get the power cord an foot peddle

Not sure. It could be something to do with the foot control, power cord, or the motor. Does the light come on? If so, it's probably not the power cord. If you have access to another foot control and power cord, that is an easy way to test. Otherwise, might be best to take it to a Bernina technician.

Bernina 1006 Parts

Bernina Foot Control Power Cord for 1000 800 Series

http://www.drdanessmh.com/berninaftc.html

...

We can find you a cord and foot control if you will send a picture and dimensions of the plug.

you should be able to fix it yourself. Make sure the machine is unplugged from the wall socket. With the foot peddle upside down on a flat surfice, using a flat head screw driver, try prying open the foot peddle. Once open inspect the wires, one might be loose or disconnected and hardly touching the leads. Secure them if they are loose or reconnect them if unconnected. Close the foot peddle, plug in machine and try the foot peddle.

I hope this helps and saves you money on buying a new one.

Please check the Stitch regulator & Presser foot lifter.

try these 2 sites, go to them and ask them if they can get the parts you need
a1sewingmachines.com
sewvacdoctor.com

There is no "belt" size. You need to measure the distance with some yarn and buy some leather treadle machine belt. There are a few vendors on ebay. The machines had a "staple" of sorts that would hold the treadle belts together that might be hard to find.

There are a few things you can do. If you are even a little technically savvy, UNPLUG the sewing machine then take a detailed look at the pedal cord from the pedal all the way to the machine and check for any damage, pinch points, etc. If it all looks good, you should be able to open the foot pedal to see inside. There should be a small limit switch that actuates when the foot pedal is depressed. Manually cycle the pedal to ensure that the pedal mechanism is making contact with the limit switch. Listen to the limit switch as it should click when you first engage the pedal. I cannot tell you exactly what you would have to do to replace the pedal but after you have exhausted what I have suggested, I would take it to a sew & vac shop and they can replace it for you. It should not be that expensive. You can call one or two shops and get quotes for replacing the pedal.

try these sites for the part you need

searspartsdirect.com
sewvacdirect.com
thecolorfulworldofsewing.com
PremierSewing.com
sewvacdoctor.com

http://janome.com/index.cfm/FindaDealer Go to this link and find a dealer close to you.

if this is a kenmore try this site...
http://www.kenmore.com/shc/s/c_10154_12604_Kenmore_Sewing+Machines+&+Accessories?adCell=AH
under featured item scroll right till you find the foot peddle. price 19.99 +s/h