SOURCE: Fisher and Paykel Smart Dribe 608
not familliar with that exact model number ( we dont have that over here in the US) we have simalair f&p gwl10- gwl11) that problem sounds as if either the pump is bad and overheating before pumping all the water or a diverter valve is not fully closing allowing water to remain in tub.
SOURCE: fisher price camera doesn't turn on
The problem is a small toggle switch inside the keyslot where the battery access door goes into. I am not sure yet why it quits getting triggered, but taking the camera apart and bypassing this swich will fix the problem. You can check to see if this is your problem without taking the camera apart by opening the access door and sticking a small screwdriver into the keyslot and flipping (gently) the little white toggle toward the back of the camera and then turning the camera on with the power button. If it comes on then the switch is your problem. I assume they put this switch in to kill power when when the access door is opened so that the camera doesn't get double power when a usb cable is plugged in (I imagine you will FRY your camera if you bypass this switch and then forget and plug in the usb without popping out the battery pack). There are eight screws that hold the cover on the back of the camera, you have to pry out those little pink pegs and then you will need a triangle bit to remove the security screws to access the inside of the camera. The two wires (red and orange) are the two that need to be connected to bypass the switch. write on the bottom of the battert pack (remove before plugging in usb) if you do this modification so you remember to remove battert power before pluggin in the usb. If you don't know what you are doing then I would suggest letting someone with some electronics experience do this.
SOURCE: instruction manual for the fisher-price smart shopper marketplace
If you can get me a product number, I think I can help you. Send me an email at [email protected].
SOURCE: nothing is happening once turned on.
here is how we fixed our sons camera. we were having the same issue:
1. take batteries out
2. plus in USB to windows Xp computer
3. let drivers install automatically
4. open my computer
5. double click removable disk
6. it will ask to format. click yes
7. Format will fail
8. Unplug usb from the camera
9. reinsert batteries
10. turn it back on
we hope this works for you the same way it works for us.
Merry christmas
SOURCE: need parts list for fisher price smart cycle
The child has wrapped the connector cords around one of the pedals of his Fisher Price Smart Cycle and it has completely severed the cord from the cycle. Is there replacement parts for this problem?
374 views
Usually answered in minutes!
×