Mcculloch rotary hoe manual - McCulloch Garden

listed in the used manual
however a 80 OEP gear oil will do the job

Greetings, I read your question and I think Reliable-Store can help you in this. Here's the site link -

Best Manuals

I have a Briggs and Stratton 4 stroke motor on a rotary hoe that stalls under load...
CHEERS

My rotary hoe has a steel rod that you can adjust for the depth and if that rod is set too far in the ground it will just sit and spin. my rod has holes in it and you set it with a pin that makes it less deeper if you want.

Go to Boschtools.com and search under manuals, put in your model. They have them all online

Your best bet at possibly getting a manual are in the 2nd link below for the rotary hoe.

Phone numbers AU and NZ
http://www.masport.co.nz/CONTACTUS/CustomerServices/tabid/679/Default.aspx

Contact Masaport directly here: (form)
http://www.masport.co.nz/SUPPORT/ImageRequestForm/tabid/664/Default.aspx

You can use the Distributor locator here:
http://www.masport.com/DISTRIBUTORS/DistributorLocator/tabid/182/Default.aspx

There is one site that is a pay site that has ONE resident Masport person. I can not list it here but has outdoorsking in the address. FixYa TOS thing.... (web search!)

As far as any engine manuals. The engine type model and series are stamped into the air shroud not far from the spark plug wire. http://www.briggsandstratton.com Type in your engine model type series and you can download you parts and engine manual.

Thanks for Choosing FixYa.

Kelly

rotary

honda has operator manuals online on their website. you can print off sections or the entire manual.

check the link for hoe to use
http://www.youtube.com/watch?v=X_oHvbFtvsw


for parts
www.mymowerparts.com/.../McCulloch.../McCulloch%20Log%20Splitter.pdf

If a roc bent the pan - I dont see how that would make it shake..

I suspect the shaft..

Hoe this helps !!