If no spark after new plug, check your kill switch for proper function, if that is working correctly you will need to check the pick up coil and gap on flywheel. Check your plug wire also for continuity in case of faulty wire.
Spark is pretty simple to get back most of the time, just dont want to start swapping parts for no reason.
Change the spark plug for a new clean one. Make sure you are using the correct gas/oil mixture.
SOURCE: 5 HP Briggs and Stratton Engine
Take the coil off clean with sand paper then get a piece of cardboard from a cereal box or cigarette box, put the piece of cardboard in between the coil and the magnetic strip on the flywheel ''believe it or not it is the perfect gap'' 'let the magnet pull the two together'' then tighten the coil down. if still no spark get a new coil.
SOURCE: 10 HP Briggs and Stratton Throttle assembly
www.briggsandstratton.com/maint_repair/manual_and_more/
Then print in model no etc. You should get owners manual as well as parts list.
279 views
Usually answered in minutes!
×