SOURCE: zanussi zdt6053 will not fill with water
Check float valve. It is probably stuck. This tells yuor machine to pump the water out and keeps the water valve from opening. Often it is something small that was placed in the dishwasher and lodges under the float telling machine that it is full of water when it is not. The float is somewhere on the bottom inside the machine typically. Make sure it moves freely.
SOURCE: Zanussi ZWF1437W washing machine - wont start
The error message "Err" usually indicates that the wash program and option are not compatible. 40 degrees and 900 rpm Spin should be o.k.. I would try another wash program with no special options and see if the problem goes away.
I had the same problem today - machine is two years old - cannot select a program - door does not close properly - the machine should bleep at you when the door opens or closes.
Problem is the catch - its has a powerful spring on the catch which in time distorts the two plastic bearings each side of the catch which then stops the door open switch working.
The fix is simple - new catch mechanism available from :-
http://www.espares.co.uk/part/dishwashers/belling/p/1083/154/0/0/551313/door-catch-assembly.html
Stock Number: ES551313
Price £11.49
Regards - - - - - - Alan.....
SOURCE: All lights flash and error E90 shows on my Zanussi ZWF1631 washer
e90 is a cable problem linking main board to user board on the front
SOURCE: Magnavox 50ML8105D 50 in. HDTV DLP TV: I cut my magnovox on and in 20 seconds it cuts off...
Contact Magnavox tech support
1,057 views
Usually answered in minutes!
×