I have bottom part of older portable cement mixer trying to find name/model number so we can get the top part. How can I submit photos to see if anyone recognizes it? Pot to be removed.

That surely can't be the model number if it looks anything like the photo. If it's a model number it should Google and it doesn't.

Hi; Are you referring to the attachments or the bowl?

Anyway, check your owner's or user's manual to the particular appliance you own...it should have a breakdown of the parts in diagram form along with a list naming replacement parts you may need to get.

It should also have customer and tech support phone numbers if not a website address for the same purpose.

In absence of the manual, you can try obtaining a manual online by 'Googling" the model name and number to your appliance or visit the manufacturer's web site.

Since you did not mention the name and model number to your food mixer, I am unable to offer further assistance.

I am guessing you have an older Peavey mixer amp. I believe these mostly used 8 amp fuses although older earlier ones may have used different. It should say on the back at the fuse holder. You can get these at Radio Shack, at better hardware store in either auto electrical or electric sections or on line.

This is the food mixer forum, not much cement gets mixed in the kitchen around here, too much danger of a flying rolling pin.

I don't think they ever made a video for that.
The grease in the D300 is sticky and runny, and has to be removed out the top once the bearing plate is removed. On the top of the main shaft is the first gear cluster and a bevel gear beneath it. If necessary, use a pulley, BUT KEEP IT AS ONE ASSEMBLY.
Once it's out, the rest comes apart easily. Just lay out the components as you find them. Clean and inspect.
The first gear is made of the bevel gear as a base, a center hub with an outer ring gear, and a stepped cover on top that sits under the top bearing. Between the ring gear and the hub are 10 rollers and spring plates which bias the rollers into the shallower end of each roller seat.
You can get instructions and diagrams here.
https://my.hobartcorp.com/resourcecenter/Pages/FilterByModel.aspx
search model number d300. near the bottom of the options is form F-3492-N. That has detailed instructions for the older version.

Locate your model number and then try searching on this site:

http://shared.whirlpoolcorp.com/product_literature/search.jsp?siteCd=KA_EN_CA


If you can not locate your model number, for a hand mixer it should be on the bottom of the mixer adjacent to the mixer attachment holders.

Thank you for using FixYa!

On models with the "STIR" speed, the RPM (Rounds Per Minute) is 60.
Set your mixer speed to "1" or "2" and do the following:
Put your hand near the Agitator shaft and allow it to brush your finger slightly. Use your
watch or clock and start counting the number of times the shaft touches your finger in
60 seconds. In your case, the correct STIR speed is 60.

According to the website the model number for a Stand Mixer should be on the bottom and back of the stand mixer.

If you are seeking a Manual for your mixer search here:

http://shared.whirlpoolcorp.com/product_literature/search.jsp?siteCd=KA_EN_CA

Your model number may be KP2672 plus an additional four characters. You can search on the partial model number you have but you will come up with 50 possibles.

Customer Service Information

Before Calling for Assistance

Please read before calling:

• The mixer may warm up during

use. Under heavy loads with

extended mixing time periods, the

top of the unit may feel warm to

the touch. This is normal.

• The mixer may emit an odor,

especially when new. This is

common with electric motors.

• If the flat beater hits the bowl,

stop the mixer. See page 10 for

more information.

If your mixer should

malfunction or fail to operate,

please check the following:

• Is the mixer plugged in?

• Is the fuse in the circuit to the

mixer in working order? If you

have a circuit breaker box, be

sure the circuit is closed.

• Turn the mixer off for 10 to 15

seconds, then turn the mixer

back on.

• If the problem is not due to one of

the items mentioned above, see

Customer Service Information.

• DO NOT return the mixer to the

retailer as they do not provide

service.

If you have a question about your mixer, call our toll-free customer service

number. Before calling, please note the model, type, and series numbers

and fill in that information below. These numbers can be found on the

bottom of your mixer. This information will help us answer your question

much more quickly.

MODEL:___________________ TYPE :___________________ SERIES: __________________

CUSTOMER SERVICE NUMBERS

In the U.S. 1-800-851-8900

In Canada 1-800-267-2826

hamiltonbeach.com

hamiltonbeach.ca
KEEP THESE NUMBERS FOR FUTURE REFERENCE

Hi WWW_SOCRAFTI, you can easily download both the Owner’s Manual and Parts List manual for your K5SS mixer online from the KA website at: http://www.kitchenaid.com/flash.cmd?/#/page/home.
Click on Customer Care>Locate Manuals & Guides> Enter the 6 character model number, in your case use KSM50P (Your K5SS mixer falls within this model range), and then select this file: KSM50PPWH0.pdf (5156.65 KB) from the Owners Manuals (9) list and this file: KSM50P.pdf (438.31 KB) listed under Parts List (4). Check to verify they match your mixer model. You can save them to your PC hard drive, and then you can print a hard copy if you wish, or just refer to it when you need to use it.
The reason I suggest downloading the Parts List manual is that should you decide to try and troubleshoot and fix your KA mixer, this manual will be invaluable in the disassembly and reassembly of your mixer along with listing all the part names and numbers. Having the correct part names and numbers is critical when reordering replacement parts when your mixer eventually will stop working.
Good Luck with your mixer, I hope this helps. Howard, Burke, VA
If this solution has been helpful to you, please rate it, thanks! -hslincoln