At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: The display screen shows OF in both freezer and...
Pl.check up the incoming power.Plugged properly.Check up MCB/ fuse control in power coming to Fridge/ also in the Fridge. If you are unable to find out call eletrician to attend.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Press the "Freezer" and "Refrigerator" buttons on the control panel at the same time and hold them for 5 seconds.
The control panel will beep, and the temperature settings will be displayed. Keep holding the buttons until the control panel beeps again and the display goes blank.
After the display goes blank, release the buttons. Demo mode should now be turned off.
If the display still shows the word "demo" after following the above steps, try unplugging the refrigerator from the power outlet for a few minutes, then plug it back in and try the steps again.
If these steps do not work or you need further assistance, refer to your refrigerator's user manual or contact LG customer support for additional guidance.
The ACTUAL TEMP light will come on and the display will show the actual temperature. To change the temperature, tap either the REFRIGERATOR or FREEZER pad until the desired temperature is displayed. To turn OFF cooling system, access SETTINGS from the HOME screen. Page over and tap COOLING SYSTEM ON.
Jul 5, 2012 - I have a Kenmore elite freezer with electronic temperature control. ...my freezer was delivered yesterday, the control panel is stuck on of, ... an electronic control on front. the display is showing hi temp and door ajar. also an l in ...
Samsung ElectronicsSep 3, 2015 - In case of wrong temperature display, possibly door opens so inside ... If the control panel is still not lit up after you plug the refrigerator back in, it may ... When initial installation, Temperature will show current temperature for a ... When the refrigerator/ freezer reach the set temperature, the blinking will stop.
? 3:50
https://www.youtube.com/watch?v=DFzTGKVo79g
Jun 27, 2010 - Uploaded by GE Appliances
CAN I TURN OFF THE DIGITAL CONTROL ON FREEZER AREA ONLY. ... I need to know How to reset this kind of refigirator, same front panel ... When you try to set the actual temperature, does your control show your new ...
Temperature displays
During normal operation, the temperature display shows the temperature in the middle of the refrigerator section and the temperature in the warmest part of the freezer section.
SB is in "Sabbath Mode". The Sabbath Mode is a feature that disables portions of the refrigerator and its controls . Sabbath Mode is turned ON and OFF by pressing and holding both the freezer "down" and refrigerator "up" indicators for five (5) seconds. The display shows "Sb" while in Sabbath mode.
The control is not seeing a feedback signal from the ice room fan. (the fan inside the freezer which pushes cold air up to the in door icemaker) It is probably blocked with a build up of ice or frost, preventing the fan blade from turning.
You said, digital display on LG fridge just keeps cycling options. Showed
"ER" error. Any ideas on how to get it to stop? The
freezer is still cold but the refrigerator isn't cold at all
Try turning the fridge and the freezer off at the controls. Then turning off the breaker for the fridge for 5 minutes . then turn the breaker back on and restart the fridge and freezer! This should reset the system and solve your problem. let me know how it goes.
Thank You, Huuum Please remember to leave a rating! Hopefully a "solved "one.
I had this on my S20brsb they said it was "change filter", I did but it didnt go away. They came to look at it for a fee, fitted a new board alledgedly and charged me £200.00 it failed again after 13 months so Im back to square 1. Hope you have more luck, try the filter it might ork for you.
×