I listened to part one of innocence by dean koontz but can't find part 2. It's not in my library.

The best general site for guitar wiring is Electric Guitar Pickups Acoustic Guitar Pickups Bass Guitar Pickups Pedals...

Try to download it again

Dean guitars made in the USA follow a serial number pattern consisting of a 7 digit number with the first 2 numbers being the year of manufacture, followed by instrument production numbers. The serial number is found on the back of the headstock. Imported Dean guitars do not have year coded serial numbers and have to be dated by configuration and design.

http://www.vintagerocker.com/serialnumbers.html#DEAN

It looks like you have 2 humbuckers (how many wires on each?), one 3 way selector and 1 volume and 2 tone controls, plus the output jack. Tell me how many wires on these humbuckers and what colors and I can help you wire it.

Clean the contacts on the input jack and battery jack.

the knob closest to the neck is your volume. And the other two are tone. one is tone for bridge p/u & other is tone for Lead p/u. which is which can vary. you'll just have to listen. hope this helps

Go to either Fender, Gibson, or another guitar company, and look up wiring diagrams. Anything with 2 humbuckers and a switch is wired essentially the same.

can be a number of things . i'll do my best with a check list. 1. Are they active pick ups.? (they need power source , usually 9 volt battery). 2. Check your cords. 3. check your amp. ( what i do, if you can, use a guitar that you know works. and check cords and amp with that. or try your guitar thru a different amp).AND THAT'S IF,. as you say your wiring is correct , and you've eliminated that part of it .I'd start with that

Try this site:http://www.seymourduncan.com/support/wiring-diagrams/

if i was you i would take the guitar apart and see if there is any loose wires especialy at the 1/4 inch inputs.