Dropped projector and bulb looks ok, fan comes on but light wont come on....?
SOURCE: I can't get the light to come on.
Sounds like your black screen shutter is not opening allowing light to pass through. Try it with the carousel and slides installed. Run a few passes.
SOURCE: 250V T6.3AH Slow Blo Fuse
Depending upon the way in which the lamp finally smoked, it is not unusual for the feeder fuse to blow. Replace the fuse and try the projector. As long as you haev a new lamp, it should work OK.
Dan
SOURCE: XR-10x bulb timer has timed out. How do I reset the projector?
you need to reset the lamp timer see http://www.ercservice.com/PDF/Lamp-Sharp-XR10-XR20.pdf
SOURCE: brake lights don't come on. checked fuse box,
look up above your brake pedal and you will see the switch.. It will either between the firewall and the pedal arm (switch moves in when you brake).. Or it will be between the pedal arm and the dash (switch moves out when you brake)
SOURCE: no low beams bulbs are ok fuses look good
There may be a relay that operates the low beam lights, check the owners manual to see if there is a relay, you should be able to hear it go "click" if there is one.
176 views
Usually answered in minutes!
×