SOURCE: hi ,my dishwasher kenwood kdw4ttsl
Hello, welcome to FixYa. NOTE: Hard Water conditions will adversely affect wash ability performance of your dishwasher. Hard Water conditions will also contribute to "Lime" (white film substance deposits and/or "Scaling" on the stainless steel surface of the dishwasher tub and "Heater Element" located in the sump underneath the removable filter screen. To assist in minimizing these conditions, it is recommended to periodically operate/rinse the inside of the dishwasher (empty) using 1 cup of white vinegar (at least once a week). Let me know how this works for you and I'll try to assist you further if necessary. Good luck and thank you for choosing FixYa. Regards, Macmarkus :)
The E4 error on your dishwasher indicates an overfill has occurred. This can potentially occur due to excessive detergent (accumulitive over time) or mineral deposit in the filters and sump as well.
**Your dishwasher has an overfill protection device which could automatically shut off the inlet valve and starts the drain pump if the water overflows and subsequently display the error. If this occurs, turn off the main water supply before calling a qualified service agent. If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher. This can be done by way of tilting it back (while unplugged of course) and allowing the water to drain from the base**
If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electrotechnician.blogspot.com/
Hi
Please
check this link to troubleshoot your problem in dishwasher if it shows F1
error:-
http://www.ehow.com/how_7307602_troubleshooting-error-fisher-paykel-dishwasher.html
Please
get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com
1,279 views
Usually answered in minutes!
×