At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
need the rubber eye piece for 7x 50 jason/empire binoculars and also the one steel rim that goes under the eyepiece. I would appreciate any help that you could give me. thanks
You can use a Ken-A-Vision Pupil camera and slide it over the eyepiece or if you remove the eyepieces Meiji Techno has a large selection of adapters that will work with most camera's, that will fit in inside diameter of this eyepiece.
You'll need to measure your eyepiece in "mm". Also determine if your eyepiece has an outer ring the eyepiece will slip over. You can find eyecups/guards on Ebay. Search under Binocular Eyecup or Binocular Eye Guard. There are also eyecups under "rubber eyecups/rubber eyeguards" but alot of these are for Microscopes and may not fit. You will need to pay close attention to the mounting type and measurements.
These are the guys you need to contact if you are in the USA;
http://www.bushnell.com/general/binoculars_legacywp.cfm?section=General%20Use
They make a lot of the binoculars for B+L who make the optics, including the legacy models.
Hope this helps :)
If not in the US please ask again
×