The menu button don't allow me to move past the number 10. I've done the 3 second reset and nothing. 1:40 keeps flashing. Other then trying the 1 hr unplugged option is there anything else I can try?

Welcome to Fixya

Try resetting the ipod by pressing the middle button and the menu button at the same time for 5 to 10 seconds. The ipod logo should appear after the reset has done.

Thank you for using FIxya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

It would have been a password set in the router menu which would be accessible by a IP address in your web browser. You would need to reset the router. This is done by holding in the reset button for 10 seconds. It will reset the browser back to factory defaults. Just keep in mind that if there was any configurations done to get the WI-FI to work with your laptop then they will have to be setup again.

Sorry to say, but this problem is easy. Just turn the key to the on position. U don't have to start it at all. Now there are two buttons on the left side of the rpm gauge. One is at top above the N light. This button changes the time (hr & min). The second button is below the N light. It shifts u from hr to min to done. Now, hold down the bottom button for 5 sec, or until u see the number flash on and off. Then u adjust with the top button by pushing it til the correct hr. Tap the bottom button to move to the min side. U do the same as u did for the hr setting. Now, press the bottom button again and ur time is set. These two buttons also allows u to reset ur trip. Also, if u mess up. U have to click the bottom button again, until u get back to the time. Sorry, but it want let u go backwards. This is how to set or adjust the clock on ur K7 GSXR-600. Take care and may God bless u and ur family/friends. L8r.

There's a reset button on the back of the router, it's a small button that you can press using a paper clip. Press it for 15 seconds to reset it.

Reset 1:
Press the reset button for 15 seconds at the back of the router while the router is on.

Reset 2:
Press the reset button for 15 seconds while the router is on after 15 seconds unplug the power cord while holding the reset button then count another 15 seconds and release the reset button. Then plug the power cord back in.

Reset 3:
Press the reset button for 15 seconds while the router is on after 15 seconds unplug the power cord while holding the reset button then count another 15 seconds and plug the power cord back in while the reset button is plugged in and count another 15 seconds release the reset button.

Hope this helps.

push and hold the trip odometer button BEFORE turning the key on. keep holding it after you turn the key on. after about 10 seconds the light should begin flashing. when it is done flashing, the light is reset.

Try unpluging your T.V. for 5hours+, then turn it back on. Worked for It's called a "hard reset" by sony.

Otherwise
Do the following steps

1. Check the Sony remote for a button labeled "Sleep." This allows you to cycle through the sleep settings and determine how long you want the TV to remain on.
2. Step 2 Press the "Sleep" button. You'll see a number come up onscreen: usually 15 or 90. When you press it again the number changes, moving up and down in increments of 15. This is the number of minutes the TV will remain on before it goes to sleep. As you cycle through it, you should see a setting with the words "Sleep Off" appear onscreen. If you leave it there, the sleep setting should cancel, allowing you to turn the set off when you like. If you miss it, just keep pushing the "Sleep" button. It will continue to cycle through the options until "Sleep Off" appears once again.
   
3. Step 3 Access the timer function to shut off the timer by pressing the "Menu" button, then cycling through the onscreen options until you reach the "Applications" setting. Press it, and then cycle through to the "Clock/Timers" option.
   
4. Step 4 Highlight the "Timer 1" setting and press the "+" button. If it's showing a given time, you'll need to deactivate it. Use the up and down arrows and move through the possible options until you come to the "Off" setting. Leave it there; that should shut the timer off.
   
5. Step 5 Repeat the process with the "Timer 2" setting, a little further down the "Clock/Timers" menu. Set it to the "Off" position just as you did with the "Timer 1" setting.
   
6. Step 6 Press the "Menu" button when you are done to exit the menu and return to the screen. You should be able to view the Sony TV as normal with no danger of it turning off.

good luck

1# First unplug tv,unhook ant.let set overnight.2# Reconect ant.Plug back in.turn tv on with button on tv.let tv run trew all its modes for 5 to 6 hrs.Don`t push any buttons!!!!! It has to reset everything.then try remote,when it starts to work,set new pin code.use your instruction book,to set all blocks to N,,Clear all favorite channels + erase channels in tv 's memory if there in there yet,takes a lot of time.it will keep resetting,remote won't work.let it run awhile. then push exit, hold 5 to 10 seconds remote will eventually come back,check your settings reset them, be sure menu is set to STOP, it may start running threw all its modes again,let run couple hrs, then push exit 5 to 10 seconds to get your remote back.keep trying this. when you think the tv is working right,turn it off for 10 seconds then back on. If it starts resetting, let it run an hr,then push exit again to get your remote back,it has to reset everything,keep trying, took me 3DAYS to get it right!!!!!!!!! the only thing I don't have working is the pic size button,Don't need that anyway. GOOD LUCK.

disk maybe dying.
did you try reset by holding down the play and and menu button together for 10 seconds?
This should flash a reset. If your ATV doesn't boot fully still most likely it is your drive

My watch has 4 buttons (2 on the left, 2 on the right) plus the "Indiglo" button. Use the "Mode" button (lower left) to move between the time and the stopwatch. When seeing the stopwatch, hold the "Mode" button. This will get you to the alarm setting mode. Press the "Mode" button again to switch to the time setting mode. Use the "Start/Stop" button (upper right) to move from seconds > minutes > hour > date > day of week. Use the "Spl/Reset" button (lower right) to change the numbers.

-AP

The following reset procedure will completely restore the default settings on the VDI-604 and VDI-624. Note: If you do not remember your password, you will have to reset the router to factory defaults. Step 1 Locate the reset pinhole on the back of the unit. Step 2 With the unit powered on, press and hold the Reset button. Step 3 Hold the Reset button for about 10 seconds. Step 4 Release the Reset button. Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting. Step 6 The device is now at factory defaults. Note: Do not recycle power during the reset procedure. VDI-604 firmware 1.05F/VDI-624 firmware 2.39DDM - The default username is admin and the default password is blank (nothing). VDI-604 firmware 1.07 Build 28/VDI-624 firmware 2.43 Build 12 - The default username is admin and the default password is password. Note: After resetting the router to factory defaults, you will need to contact Verizon to reconfigure your WAN settings.