How to reset power error0xd05d010d in hp 5610 all in one printer

SOURCE: Reset Power

Hi,
turn the printer on and unplug the power cable from the back of the printer without turning the power off
press and hold :
OK and CANCEL, while keeping them on hold put the power cable back in ... it ll do a full NVRAM reset on it .. then it ll prompt u for the language and country follow the steps it ll be resolved ...
Best of luck
:-)

SOURCE: Please help me

hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost,Scanner does not work, Connection problem etc. For find all these software solution just clickhere....



http://www.hp.com/printer/prob676ijt65/solution

ab95

SOURCE: Error of printer HP 5610

hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....


http://www.hp.com/printer/prob676ijt65/solution

djiu9ofdfd16

Clive

• 4362 Answers
• Posted on Jan 25, 2010

SOURCE: how can i clear the error 0"xd05d010d reset power"

Reset the product:

1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the product.
3. Wait for the 'Insert Cartridges ' message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.

SOURCE: printer problem

Reset the HP All-in-OneFollow the steps below to reset the all-in-one.

1. Turn off the HP All-in-One by pressing the On button.
2. Unplug the power cord from the back of the HP All-in-One.
3. Plug the power cord back into the HP All-in-One.
4. Turn on the HP All-in-One by pressing the On button.