Singer magic press 2. cover lid not opening - Singer Irons

3 Related Answers

Anonymous

2 Answers
Posted on Nov 05, 2009

SOURCE: my singer magic press 4 iron comes on but the plate will not heat

Not sure how tech savvy you are, but the service manual can be downloaded at http://www.parts.singerco.com/CPpartCharts/Presses/MP4.pdf
UNPLUG THE IRON. Figure 7 shows the wiring. Note that the lamp inside the switch is shown incorrectly. It should be on the other side of the switch. Also the 2 wires running down to the fuse are the red wires. The red wires are interchangeable. Use a continuity tester between wire 2 and wire 3 to test the thermostat. Should be open when dial is turned to the left. Closed when dial turned to the right. Also check continuity on the heaters. If everything looks good but it still doesn't work, replace the circuit board.

Anonymous

1932 Answers
Posted on Jan 16, 2011

SOURCE: I need a cover for

Hi,
You can get the cover from below website
http://thesewingcenter.com/singer-msp7-magic-steam-press-c-626_809_946.html
Thank you

Anonymous

1138 Answers
Posted on Jan 23, 2011

SOURCE: I NEED A NEW COVER FOR MY SINGER MAGIC STEAM

purchase here

http://www.uksewing.com/product_info.php?products_id=40

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Looking for a Singer Magic Steam Press MSP-8 Manual

The only thing available online is the Parts List

https://www.manualslib.com/manual/154321/Singer-Msp8.html#product-MSP8

The closest is the ESP2 Steam Press.

https://www.manualshelf.com/manual/singer/esp2-hd/use-and-care-manual.html

https://www.google.com/search?q=Singer+MSP-8+Manual

..

Read full answer

Jun 17, 2022 • Singer Irons

0helpful

1answer

I need a Singer Magic Steam Press 7 Manual

www.singerco.com/uploads/download/538_esp2-steam-press.pdf

http://www.singerco.com/uploads/download/538_esp2-steam-press.pdf

Read full answer

Jun 16, 2018 • Singer Irons

0helpful

1answer

I have the same question. The Singer ESP 2 machine keeps beeping even when the machine is open and the temperature switch then does not operate.

The problem is caused by a level sensor/mercury switch on the PCB under the top cover. Mine did the same. Changed it with a similar part and still going 12 years later. Sorry for such a late reply.

Read full answer

Aug 19, 2016 • Singer ESP-2 Magic Steam Press

0helpful

1answer