I'm looking for manual 1&2 for Elna lotus sp type 35 p836436 the 1968model

Elna lotus SP reverse sewing control


Elna SU Star Series reverse spring repair


Manual Buttonhole Settings

The tension dial is on the front of the machine right above the needle. The higher the number, the tighter the tension is applied to the top thread. HINT: When threading the top thread, ALWAYS RAISE the presser foot throughout the entire threading process. This allows the thread to seat completely in the tension disk. Tension is correct when the top and bobbin threads meet in the middle of the fabric.

Elna Lotus Instruction Booklet

Elna Lotus SP bobbin case repair Removing cotton jam from Elna Sewing...

Elna SP ST SU sewing machine repair tips (I use liquid Tri-Flow Synthetic Lube or silicone spray to loosen parts seized from old oil. Do NOT use WD-40, cooking oil, motor oil...)

try these links and see if they can help you

ultimatesewingandvac com


Expert Service Largest Selection Everything Sewing Delivered Quickly to...

Elna SP ST SU sewing machine repair tips - YouTube

? 2:25
https://www.youtube.com/watch?v=TqrbimZyP1U
Oct 24, 2011 - Uploaded by Absolute Sewing
More Photos on replacing gears and some repair ti... ... I amhaving trouble with my Elna SU 62 skipping stitches when I sew on knits. ... Elna Lotus SP bobbin case repair - Removing a cotton jam from a Elna Sewing machine ...

Amazon.com: Bobbin Case 627569106 - Elna, Janome ...

follow this link for free download
http://www.scribd.com/doc/25386753/Elna-Lotus-Sewing-Instruction-Manual Elna Lotus Sewing Instruction Manual

I have a PDF of this manual for free. Please provide me your email and I can email it.

If the bobbin case rotates freely it is probable that the pinion gear is broken. Replace the gear, retime machine and voila it works again. Trouble is tough to find the gear anymore good luck it is a good machine and worth the effort

Hi Jeanne, you might want to check out my tip on early Swiss Elnas,

http://www.fixya.com/support/r10602655-acquired_early_swiss_elna_sewing

it should help you get the Lotus going. Lovely machine. If you are in the USA you may also want to contact White Sewing Center as he may have this manual available for sale or a copy of it. www.whitesewingcenter.com.

Remember to use the Elna 7 hole dished metal bobbins, there are 7 holes on the top, and looks like this

Always wind it and insert it into the machine this way. Don't use any other bobbin. Standard needles 130/705H, flat shank to the back.

Check out my other tip on bobbin winding too, it is important to keep tension onto the thread spool that you are winding thread off as the machine doesn't tension the thread for you. So you need to apply pressure to the top of the thread spool as you wind off, use the curved handle of your scissors on the top of the spool.

Feel free to connect to me and ask if you have any other questions, I have a Lotus TSP at home and its almost identical to the SP. Happy stitching.

Look in the back. By the lever you will see a white knob on a spring. Pull this down, put it in the bobbin; lift out. This is the bobbin take out method. Hope this helps. Keep this machine. It is great and only increases in value.

http://www.scribd.com/doc/25386753/Elna-Lotus-Sewing-Instruction-Manual