Question about Whirlpool Duet GHW9150P Front Load Washer
Spot remover does not remove stains; however, Colthing streaks come out with "WINK" which is a rust remover. We tried cleaning the washer with product made to clean washers and still have streaks in clothing. Whirlpool has no hot line for help
The brown stains are likely coming from the felt drum seal. The OEM adhesive is tar based - and after time and use - breaks down.
You'll need a new felt seal - and the adhesive that is used should be silicone based... eliminating the brown streaks.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Posted on Sep 30, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 26, 2015 | LG Washing Machines
Feb 26, 2011 | Whirlpool Duet GHW9150P Front Load Washer
Feb 16, 2011 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....
1. Iron or manganese in the water supply. • Avoid using chlorine bleach on rust stains. It will make them darker and more obvious. • When iron is dissolved in the water, use granular detergent plus a non-precipitating water conditioner, such as Calgon or Spring Rain*. Better results may be obtained by dissolving detergent and water conditioner in the wash before adding the clothes. Be certain that all clothes are down into the water before starting washer. • If the iron is suspended in the water (it will settle out), attach a rust filter to the faucet and inlet hoses or to the water line. • If iron or manganese stains are a recurring problem, the customer may need a special filter or chemical feeder installed in the home to remove these minerals from the water supply. To remove: Launder with RoVer* Rust Remover Part No. 057961 using the directions below: • Top loading washers: a. Fill the washer with water (no detergent), selecting a temperature suitable for the fabric (hot or warm). b. Add 1/3 cup RoVer and let it dissolve by agitation. c. Add clothes and allow washer to complete the cycle. d. Follow up with an additional wash with detergent.
Be sure to check the spin basket for rust spots also.
Jan 16, 2011 | Maytag Centennial 3.2 cu. ft. SuperSize...
Jul 23, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Jul 26, 2010 | Whirlpool Duet GHW9150P Front Load Washer
May 19, 2010 | Washing Machines
Jan 27, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Nov 14, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Nov 01, 2009 | Maytag MDB9600A Jetclean II Built-in...
2,419 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: