How do i set the vave timing on a masport 10a000 engine

try GOOGLE

Manual for sale:


Masport Ride On Mower Parts List Owners Manuals OutdoorKing Repair Forum

around 700 dolar but if your timing chine broke posible you have a internal damage on your engine because this engines are interferace an piston to vave clrance

Go to youtube On line type step by step assembling masport 400

Remove Engine From Vehicle,
Strip Engine And Wash Clean,
Take Engine Block ,Conrods,Cylinder Head To Machine Shop Ask Them To Check all Sizes For Wear Etc If Worn Beyond Usefull Limits Purchace New Liners And Pistons And Have Them Fit It For You,
Some Times The Bore Changes Shape I.E. Bore Is Oval If So They Do Supply Oversize Chrome Linners So That the Block Can Be Borred Round Before Fitthing New Linners!
Check Crank Shaft And Cam Shaft ,
Cylinder Head Should Be Presure Tested And Vave Guides Checked, Valves Should Be Checked For Wear Seating And Lapped Back In
Injector pump Service And Injectors Serviced
Get Full Overhall Gasket Set New Set Mains and Big End Bearings ,
You Should now Be ready To Re Assemble Your New engine!
Good Luck!

The mowers are:
Model 400 (3.5 hp Briggs and Stratton)
Model 500 (Honda GX160)
Model 660 (Honda GX160)

I do not have the manual your looking for but the part number for the owners manual is
031796

You should contct these folks to order a manual:

HEAD OFFICE - NEW ZEALAND

Masport (NZ) Ltd

P.O. Box 14-349, Panmure

Auckland 1741

New Zealand

Phone: ( 064 )( 9 ) 571 1200

Fax : ( 064 )( 9 ) 571 5864

Website : www.masport.com
Email : [email protected]

PARTS manual is here:
http://www.masport.com/LinkClick.aspx?fileticket=xZ1hKEx%2FYSc%3D&tabid=655&mid=1460

Thanks for choosing Fixya,
Kelly

Your best bet at possibly getting a manual are in the 2nd link below for the rotary hoe.

Phone numbers AU and NZ
http://www.masport.co.nz/CONTACTUS/CustomerServices/tabid/679/Default.aspx

Contact Masaport directly here: (form)
http://www.masport.co.nz/SUPPORT/ImageRequestForm/tabid/664/Default.aspx

You can use the Distributor locator here:
http://www.masport.com/DISTRIBUTORS/DistributorLocator/tabid/182/Default.aspx

There is one site that is a pay site that has ONE resident Masport person. I can not list it here but has outdoorsking in the address. FixYa TOS thing.... (web search!)

As far as any engine manuals. The engine type model and series are stamped into the air shroud not far from the spark plug wire. http://www.briggsandstratton.com Type in your engine model type series and you can download you parts and engine manual.

Thanks for Choosing FixYa.

Kelly

Yes sir assuming that all parts are origional. 9 times out of 10 its a rusted up idler arm. Remove the rust and grease up the idler arm bushings. Lubricate all other pivot points with machine oil or wd40.

Have you checked the O2 or MAP sensors? I would check these.

try this forum, bruce there seems to be the man to know about ur machinery, he could more than likely help


http://www.outdoorking.com/forum/ubbthreads.php/ubb/showflat/Number/5827