Open to clean juicer maching - Jack Lalanne Power Juicer (Stainless Steel)

This depends on the juicer you have.

Search for the directions booklet online of the model number and type of juicer you have.

You may download a copy of the manual here.

Go to this website: http://www.powerjuicer.com/power-juicer-manuals.php

Select your model to open the Operating Manual which contains illustrated assembly and disassembly instructions.

You will also find a number of useful links on the right hand menu as well as a selection of How To videos that may be helpful.

Assuming you are dropping down the metal arm, removing the plunger and the rear pulp collector: everything unscrews from there. Hope you did this immediately following the juicing as it gets sticky and can be hard to open if you waited until it dried. When you get to the screen, it opens with a red tool they provide to unscrew it. Hope this helps.

I did some research here on Fixya and this is what another expert had to say.........pull the metal bar forward and down to open up into the blade compartment. your juicer should have come with a handle type key wrench thing that you stick on top of the blades into holes to unscrew blade holder, while unscrewing that hold the blade still.
Hope this helps you......best wishes.

Hi, I have the Acme 6001 Juicer and I love it! I would take the broken bracket and the juicer to a machine shop that does welding. Shouldn't cost more than a few bucks for them to spot weld the bracket back on. A good maching shop can fix this as they will have another bracket to reference the repair. hope this helps...gary One of our local shops can fix about anything and they are very reasonable and pretty quick.

Hi there: have the same problem, go to www.powerjuicer.com/pdf/classic.pdf.
you will need the crescent tool which I do not have as yet but two screwdrivers work, be careful.

You need the crescent tool to remove the blade. You insert tool into the blade and push down while turning. Try the official Jack Lelane Juicer website where you can order for about $20.00

There should be a lug nut in the center that loosens so you can take the blade, basket & outer basket out to clean.

http://www.smallappliance.com/product.asp?pid=9879&cur=USD&sid=18956&mid=34&gid=18975&prdCls=P&shopBy=Category