Looking for a manual on the oster regency kitchen centre 1983 or1984

You are able to download a copy of the manual for your Oster 3200 Food Processor from this link:

http://kitchen.manualsonline.com/manuals/mfg/oster/3200_3212_3220_1_2.html?idRes=536605

I have an instruction manual for that model number 978 06a. I could copy it for you. Write me at [email protected].

I have an Oster Kitchen Center by sunbeam. It has the mixer, blender and food processor. When I attach the processor to try to use it the blades do not spin. If I push the siler know down with an objest it will turn. Am I missing some little piece to make it work.

found my manual

You can get the Oster Kitchen Center manual + recipes here.

http://www.oster.com/manuals/oster/003200-000-000_English.pdf

you will need the free adobe acrobat reader if you dont already, chances are you do, I found this at oster.com

plz con-022-23095757 / 23051554

What exactly are you having problems? Setting up the grinder? The hopper inserts into the back side of the mixer head locks in place with a set screw. Then insert the piece that looks like an auger push it all the way back. next, comes the four blade knife it looks like this " + " if look at the center of the blade you will notice a square hole on one side place that side towards the auger. Then there are your grinder attatchments I only have two,one coarse, one fine. place one of them against the blades placing the tabs in the cutouts on the discharge end. mext there is a large metal cap thread this on the discharge. Set the control to grind and the speed to 10. You are set to go. cut the meat into strips or chunks that will fit down the infeed and use the plastic plunger to push them into the auger.

http://householdappl.com/downloads/Kitchen_Center_Manual.pdf