At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have changed my drainage water pump, for my samsung diamond drum WA80v3 washing machine, but still it is not pumping the water properly. it shows an error code 5E
I have changed my drainage water pumpfor my Samsung diamond drum WA80V3 washing machine. but still it is not pumping the draining water properly. after some minutes it shows an error code 5E
Hi Gis George, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?
Have you checked the line for clogs?Hi Gis George, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?
Have you checked the line for clogs?
when i opened the side cover of the pump i have found 2 coins & i key.but i removed that & changed the pump also. but still the problem persistswhen i opened the side cover of the pump i have found 2 coins & i key.but i removed that & changed the pump also. but still the problem persists
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, there is a pressure switch which is connected to the outer drum via a length of tube, this tells the machine whether there is water in the drum or not, this can also get blocked which fools the machine into sensing there is still water in the drum when there isn't, remove and unblock this tube and this should fix your problem, because the machine won't allow the normal program to go into spin if it thinks there is still water in the drum.
The drain pump is either blocked or failed. Check the filter if it's clear then you are most likely up for a new drain pump. Here is a link to the part you need and a video on how to do it. Samsung DC31 00030E DRAIN PUMP B20 3 120V 60 NEW ORIGINAL
There are a few things that could cause this, first of all check the lid switch. That is a safety thing that makes sure the lid is closed before it allows it to start washing or spinning. Some other culprits could be a clogged filter, or a broken belt ( if your model has a belt) does the machine sound like its trying to wash? or does it just turn off and do nothing like its dead? if it seems dead its more than likely the lid switch, they are about $40 and simple to replace.
It should be fine but I'm not sure how it will work with the 220v. Be sure that the power there is 110v red to white and 110v black to white. If the power is not, it probably won't work. Good luck
1. Empty the drum via the filter / trap at the front (there is sometimes a drain pipe near the filter - otherwise be prepared to use lots of towels to soak up the water).
2. Check / clean the filter.
3. Ensure that the drainage pipe is not blocked.
4. Check that the pipe from the pump to the waste water pipe is not kinked / blocked.
5. Check that the pipe from the drum to the pump is not blocked.
6. Does the pump sound like it's trying to work? If not, it could be that the pump is dead. Pumps can often become blocked with fluff / slime from the machine.
the drain pump of the washing machine is either got loose or its not working or the drain pump is blocked.
Water outlet fault (Grey Hose)
If F3 is flashing in the display, there is aproblem with drainage. Check:
• that no objects are stuck in the drainage
hose outlet.
• that the drainage pump is not blocked by
foreign objects. Clean the pump (see the
"CLEAN THE PUMP" chapter MENTIONED BELOW FOR MORE HELP).
• that there are no kinks in the drainage
hose.
------------------
CLEAN THE PUMP
Checking the trap and drainage
pump
The washing machine has a trap, where
coins, hairpins and the like can get caught.
To clean the filter and drainage pump:
1. Make sure the machine is empty of water
and that it is switched off at the mains.
2. Open the hatch for the drainage pump as
shown in the illustration.
3. Drain out the water, into a bowl, for
example, by unhooking the drainage hose
from the pin inside the hatch.
4. Unscrew the cover anti-clockwise and
remove.
5. Remove any foreign objects from the trap
and pump assembly. Check to see that the
pump blades, right at the back, will rotate.
6. Screw on the cover, replace the drainage
hose on the hatch pin and close the hatch.
----------
This will help.please do rate the solution if helped.keep updated for further assistance.
The pump acts as the drain valve. It sounds like the pump check valve is not working and you will probably have to replace the entire pump. The pump is fairly easy to replace.
Verify that the outlet from the pump goes directly to the drain hose. If so, the only other thing you can do is remove the drain pump and disassemble it to see if something is stuck in there or something. However, this is a more advanced procedure so I would recommend against it. Replace the pump.
Hi Gis George, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?
Have you checked the line for clogs?
i dont know the line to check the clogs.
can u pls tell me how to check this one?
when i opened the side cover of the pump i have found 2 coins & i key.but i removed that & changed the pump also. but still the problem persists
×