Need parts manual and wiring diagram - Irons

Go to wow.com and search for steamer wiring diagram.

Google Rowenta and go to their website, they will have parts diagrams and wiring diagrams. Hope this helps, please post solved on fixya.com. So I get credit for a solved problem if it does.

you can download instr. manual from www. fitness.manualsonline.com or www.retrevo.com or www.manualsfactory.com

service manual go www.pdfservicemanual.com
God bless you. However see the diagram is universal for repair small appliances.

I have a DE-05 that needs a new cord and cleaning of steam discharge holes. I'll be gald to take photos and send them to you if you'll share your source for parts and method of disassembly. Contact me at chuxbizAThotmail.com, just replace the AT with @.

Thanks,
Chuck Jones

you can buy them at any electrical store or some hardware stores would have them... take the wire in with you (lablel where each wire goes in the switch or draw a diagram first) or take the whole iron with you. they crimp onto the wire

Same issue i believe
with metal part laying flat (ironing position) and looking at bottom side, from the left to the right - white & blue leads, lamp(resistor lead), red then both black leads and other end of lamp.
im guessing the themal fuse is the lamp? what is the PN where can i get it.

i had a small shere fall out of the unit, besides the positioning switch where else would this be located?
Thanks

I couldnt find any diagram on the web.Have a look at link below. it contains some usefull information about parts avilability.
http://www.californiaelectricservice.com/rowenta_factory_service_parts.asp
email at [email protected]

Some parts are here:
http://www.smallappliance.com/product.asp?cur=USD&sid=18995&gid=19001&mid=26&pid=8952&prdCls=P&shopBy=Brand

What sounds like is the fuse that governs the heating of the unit is either burned or not functioning. You can get a manual on how to fix that directly from feiyue yamata's site here. http://www.feiyueusa.com/Manual/FP202ELFuseChange.pdf
The problem is that if you have a psp990, it is not their item, it is a rebranded yamata so they dont have specific instructions for it. After you changed that fuse, i am almost positive you will be able to use your press again.