Need know the size and diagram of the drive belt

Could you please post more information? Make, model and year of the vehicle. Is it Diesel or Petrol and what engine size is it? Is this for the Auxillary belt or the Timing belt. Without more information you are not likely to get any answers.

Need to know the year and make of the vehicle .

Need to know the year and possibly the engine size (not sure if there are more then one engine size depending on the year).

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

To answer you more direct question about the Serpentine Belt driving the Alternator: It depends on what size engine you have. Also: if you only have 1-Belt: then yes it drives the Alternator. However if you have more than 1-Belt, then look at the Diagrams Provided (on the direct link) to compare which Belt drives the Alternator.


CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!

http://www.2carpros.com/car_repair_information/year/2001/make/hyundai/model/accent/2001_hyundai_accent_drive_belt_routing_diagram.htm

okay....here are some drawings....since I don't know your engine size, please choose the correct one below:


Drive belt routing-2.0L SOHC engine with A/C


Drive belt routing-2.0L SOHC engine without A/C


Drive belt routing-2.0L DOHC engine

You didn't list your motor size so please pick the applicable diagram:


Accessory serpentine belt routing—4.8L, 5.3L & 6.0L engines


Accessory serpentine belt routing—5.7L engines with A/C


Accessory serpentine belt routing—5.7L engines without A/C


Accessory serpentine belt routing—6.5L Diesel engines


Accessory serpentine belt routing—7.4L engines


Accessory serpentine belt routing—8.1L engines

Forward belt is a 1/2 by 27 (L4270)
Reverse belt is a 3/8 by 30 (L3300)

Diagrams WRITE BACK i need to know the Picture shows for you does on my end Fig. 32 Serpentine Drive Belt Routing. 4.0L/6-243 W/air Conditioning & Power Steering PLEASE RATE ME Diagrams Notes Fig. 30 Serpentine Drive Belt Routing. 4.0L/6-243 Less Air Conditioning

Donne Trav, you can take that belt to an electronics shop (your neighborhood shop is best). They will most likely have replacement belts. They will also have a tool that measures the belt so you know which size to get. I used to fix T.V.'s and VCR's. Its the best method when you cannot source an original belt. As far as the diagram, I would need a model # of the radio to even start a search for such a thing.