The only thing it tells me is to turn on and off the printer, and when I do it continues printing, either print 3/4 of a page or doesn't print anything at all before giving me the error message again.
I am on my second printer with the error. Epson explained it is a motherboard failure. The error is not caused by a PC or the software on it. Instead, this is a printer hardware failure.
After exchanging the printer, the replacement printer has now dies from the same error. The problem starts as blurry printing and progresses to the full hardware failure. Once the Hardware fails and you get the error code, there is nothing an end user can do. The motherboard needs to be replaced.
My printers were working fine up until I swapped out the factory cartridges that shipped with the printer. In both of my cases, there were no issues or symptoms until I started using the Epson XL cartridges. As soon as I installed those, the symptoms started to show. Within a couple of months after swapping in the XL cartridges, the motherboard dies.
Options:
1) Call Epson and complain, make them log the details even if it is out of warranty. This helps establish the pattern and knowledge of the issue.
2) Swap printer if under warranty. They may want a credit card to charge in case they do not receive the bad printer back. Just resend it in the box the replacement came in. Epson supplies shipping labels and covers the shipping costs.
Thank you for a great comment. The Mother board is $88 at Compass Micro and $9 for shipping. They -- and Epson service center -- do not recommend replacing because of codes that have to be adjusted. Better to buy another printer. I got 5,000 pages, or so, out of mine.
mine just went but I must have been lucky 30,000 pages printed (10,000 in colour) 40,000 scans , best printer I ever had. Only problem is I just replaced all off the ink cartridges literally today and itr died, just hope I can use these cartridges in my next one as its $200.00 in ink as they are all xl's
Thank you
I followed the steps at the bottom of this page:
http://www.epsonprintersupportnumbers.co...
Went to settings-Sysrem administration- scrolled to last option to reset to default settings- chose 'printer'- chose restore system default (I also did this for the 'fax' and 'scanner' but not sure if I had to do all three). Didn't have to turn it on and off again, it just printed.
this worked !!
be careful!http://www.epsonprintersupportnumbers.co... has nothing to do With Epson! it is a rogue phishing website! BE VERY CAREFUL!
If you want to buy the worst product in the world that converts itself into an inconvenient huge paperweight, buy Epson.
I went through 7 Epson WF 7620 in 4 years all slowly died with the same error. Once the error starts, it is just a matter of time.
It is the worst product and I'm surprised that to date there is no product liability lawsuit about the defective product they produced!
One thing is for sure, never, never ever again Epson!
×
Hello, Everyone, Here You can follow us to install and download the driver of canon printer canon.com/ijsetup. Its best part is that if you connect to USB and your download the driver automatically then you have no issue. But it requires the driver then you can visit our website to follow the instruction. Visit On - http //ij.start.canon setup
This is one of the known issues for its hardware troubles. this error si mostly because the printer is clogged or the driver has been corrupted by the printer. overheating could also be the cause behind the trouble so please follow the steps given below.
Source- https://printerfaq.com/fix-epson-error-code-0x97/
1- Restart the Comouter as well as the printer
2- remove the printer cover and clean the printhead
3- Eject the ink cartridges clean the printer nozzle
4- update the printer driver
5- make sure the wifi is connected to the printer and print a test page to make sure.
This video guides through a few resolutions for this and similar Epson printers:
Thank you, Anjazmoro Wicaksono, you solved my problem, it was too much wet ink in the cleaning pad inside the printer. Before cleaning it I've returned the printer at an authorized repair center that substituted the print head, completely free. That wasn't the problem. In two months the pad had the same problem, and the printer displayed the same generic error. Thank you again, it was so simple, no driver issue, no real hardware failure, only a wet tissue to clean the pad.
All you need to do is update the firmware, then run all the maintenance diagnostics, one by one, and the problem goes away. Also, I noticed that if I close the document that I am printing as it starts to print it seemed to coincide with the fault.
Agreed! I updated my firmware from the Epson site and problem is fixed!
I have tried to do that and it kept asking me for the admin password, I do not know it and tried to change the password, it would not even do this. It was working just fine making copies and printing, but then suddenly stopped mid printing a large document. We did all the steps from unplugging, removing all cords, ink, cleaning, turned back on pushed start to copy and still came up blank page with error 0x97.
×
EPSON WF 4630 Error Code 0X97
Printer only prints top third of page and same thing occurs when trying to make a copy.
EPSON Customer Support states this is a Hardware Failure and you need a new printer. If your printer is out of warrantee (1 year in most cases) all EPSON offers is to email you a coupon towards buying a new printer through their Customer Loyalty Program.
Unlike previous posting, this has nothing to do with a virus and I would caution against downloading the links that those posts offer to fix the problem as they are most likely malware.
I own this piece of junk, and it is a motherboard issue according to the incompetent fools in many other countries that i was bounced around to. first I couldn't understand anything they were saying and second wouldn't shut up long enough for me to actually explain the issue.
When I finally got someone in the USA they were of absolutely no help my printer is out of warranty so they didn't care anymore,but they were really wanting me to go to their customer loyalty site and buy another printer. apparently they think we are pretty Ignorant and we would just jump at the opportunity to spend good money on another pile of Garbage that they will not stand behind and would not even offer to help fix or do anything to make a customer happy. I would not have an issue if I had worn my printer out but it has less than 400 prints on it and is still on the factory cartridges no excuse for it at all.
STAY AWAY FROM EPSON THEY ARE A LOUSY COMPANY as for me I will NEVER as long I live own anything they make or have their name associated with they just lost a customer for life.
And if asked I will NEVER say anything good about them.
I had the same problem
And what i did was i ran the clean print head program twice and i lrinted the results.
After that i printed many pages and seems like it doesn't show the error yet
I had the same problem
And what i did was i ran the clean print head program twice and i lrinted the results.
After that i printed many pages and seems like it doesn't show the error yet
A piece of garbage and a lousy company is a mild expression of the facts!
a huge lawsuit for defective product and services would be the best thing!
They better add a "T" after the W before the F! the printer Name WTF7260 is most appropriate for this decrepit piece of garbage of a so-called printer!
Since late December 2014 this is my 5th (!!!) replacement printer from Epson and just a minute ago again error code 0X97 again!!!
I had to file an extension for my taxes in April Of this year because the printer stopped (the fourth one (!!!) in the middle of tax preparation.
now the fifth one just failed (11/07/17 12:56pm PST) with error code 0x97!!!!!!!!!!!!!!!
I will let everybody know that the Epson are absolutely worthless useless products that just suck ink at a $$$$ premium for nothing and the whole companies is one big ***** and I hope they go bankrupt those inept troglodytes!
×
My Answer is DO NOT BUY THIS PRINTER!! My printer started giving me this error and when I called Epson they said because my printer is out of warranty they wouldn't replace it. I have had this printer for a year and a half and it's rarely used, in fact I just replaced the ink for the first time. So not only am I out a printer but I am out the $100 for the new ink! I would think that a printer should last longer than the ink cartridge and I think that Epson should stand by their products if this is a know problem.
Is the error code on the printer or the pc?
https://files.support.epson.com/docid/cpd4/cpd40083.pdf
Fix 0x97 Windows XP Vista 7 and 8
The right way to deal with 0x97 error codes
Click here now to conduct a quick scan for 0x97 as well as related problems.
0x97 error message codes are triggered by corrupt system files inside of your Windows operating system.
Repair Guide
To Repair (0x97) errors you'll need to follow these steps:
Step 1:
Download (0x97) Fix Patch
Step 2:
Click the "Scan" button
Step 3:
Then click on 'Fix'. The Repair is complete.
*File size: 1MB
Download time: <45 Secs
If you experience 0x97 error message then we firmly recommend that you run an error message scan.
The following article provides information that demonstrates to you the best way to treat your MS windows 0x97 errors both by hand and automatically. In addition, this guide can help you to solve most typical error messages connected with 0x97 error which you may possibly receive.
Notice: This post was previously written and published under WIKI_Q422174
Contents
1. What exactly is 0x97 error message?
2. What can cause an 0x97 error code? 3. Ways to easily repair 0x97 error.
What exactly is 0x97 error message?
A 0x97 error code is the number and letter format of the error message produced. It's the standard error code layout utilized by Windows and other Microsoft Windows compatible software programs and device driver vendors.
This kind of code may be used by the merchant to identify the error caused. This unique 0x97 error message has a numeric code in addition to a specialised description. In some cases the error message might have extra variables in 0x97 format .The further number and letter code are the location of the system regions where the guidelines are stored at the time of the error.
What causes 0x97 error message?
The 0x97 error is usually the result of Windows system corruption. Missing system entries are often a real danger to the health and wellbeing of any machine.
There are quite a few situations which can have resulted in a system file error. An unfinished install, a partial file erasure, incorrect deletion of utilities or equipment. It can also be triggered in the event your computer is contaminated with a trojan or spyware invasion or through an incorrect shutdown of the computer system. Any of the previously mentioned actions could very well result in the deletion or data corruption of Windows system files. That corrupted system file will cause missing and wrongly connected information and data files needed for the optimal working of the program.
Simple methods to easily repair 0x97 error code?
The two main methods in which to deal with 0x97 error code:
Advanced Computer User Remedy (manual):
1) Switch on the machine then login as the administrator.
2) Then click the Start button then click All Programs, Accessories, Tools, then click System Restore.
3) From the next screen, click on "Restore my machine to an earlier date" and then click on Next.
4) Choose the most recent system restore date within the "click a restoration date" listing, and then click on Next.
5) Then click Next on the verification window.
6) Restart your personal computer whenever the restoration has finished.
Inexperienced Computer User Remedy (completely automated):
1) Download and save this (0x97) repair utility.
2) Setup software and click on Scan button.
3) Click the Repair Errors button in the software when the scan is completed.
4) Restart the computer system.
This error is NOT caused necessarily by corrupted files on a PC. Our printer errors with the same code when doing copying directly on the printer. There's something wrong with the printer. If a fix could be loaded onto a memory stick and fix the firmware I'd certainly appreciate it and instructed how to do it.
×
SOURCE: Epson R230 printing unwanted lines
The problem is waste ink around head sprayer (at (bottom plate of head). Turn of printer. Move head to center. Put wet tissue (with hot water) at head cleaning mechanic pad. Move head to parking position. wait till 10 minutes. check it. You can repeat 3 times.
SOURCE: RE: Epson TM-U200 printer with error (2 Flashes)
http://www.icscale.com/TECH%20MANUALS/TMU220_TRG_RevD.pdf
SOURCE: My Epson NX 400 is giving me this error message:Error B88/69/68 C
Try to run the ink pad reset utility software.
Please log on to epson.com. The software runs on win xp and win vista.
SOURCE: Printer error see your documentation
My printer appeard "PRINTER ERROR SEE YOUR DOCUMENTATION" on the printer's panel, I turn the printer off an then put it ON but still the message is coming again. So I cannot printer or do anything. How can we solve fix this problem?
MY printer model is: EPSON STYLUS OFFICE TX300F
SOURCE: My Epson Stylus Photo R230
Jast go to the web:
http://epson-r230-reset-software-free.fyxm.net/
Then download The epson r 230 resetter and install the software in your pc. In this time please follow these instruction:
12 Jan 2006
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run "Start.bat" file.
This program will set your computer date to 12 Jan 2006.
Click "Accept" button.
Click "Particular adjustment mode" button.
Select on "Waste ink pad counter" and click "OK" button.
Click on "Initialization" button and the program will reset the protection counter.
Click "Finish" button.
Change your computer's date back when it prompted.
Reactivate your anti virus if any.
Thank you.
92,640 views
Usually answered in minutes!
Epson WF 4630 Error 0x97
Turn off the printer and unplug the connected cables to it to fix Epson WF 4630 Error 0x97.
Remove the printer's cartridges and press down the Power button to release the remaining power in the printer.
Now, insert back all the cables into the printer. Switch it on.
If the Epson WF 4630 Error 0x97 still persists, go ahead to the next step.
Once the printer is turned off, leave it to rest for five minutes.
Open the printer's lid and clean the printer head with a wet paper towel.
Keep the soaked paper towel in the path of the printer head to solve Epson WF 4630 Error 0x97.
Wipe the Epson Workforce Pro WF 4630 paper feeder to keep the dust away.
I hope these different techniques will be helpful to fix Epson WF 4630 Error 0x97 error.
Mark Wilson
×