Looking for spare parts for a Robot Coupe R301 Ultra Food Process

you look for hidden screw perhaps under a label

Pour penetrating oil down the upper shaft if possible. Remove the allen scews from the base with 5/32 T handle wrench. Remove the round snap ring on the motor shaft. Use vise grips or channel lock to secure the shaft. Twist the blade off and inspect it. It most likely will need to be replaced as the key that slides on the shaft will have deteriorated.

Yes you will need to replace the machine.

Hi im after a replacement lid for my robot chef rc3 if anyone has a spair one please email me at [email protected]

It just a long shaft phillips screwdriver. The screws are located under the foot pads. They just pull out and then there are the four screws.

I need the instruction manual for the Cuisinart DLC-8S food processor.

Where can I get it?

Thanks.

[email protected]

Remove the base the screws are under the rubber feet,on top of the machine there are three screw caps remove these with a bradel, unscrew screws with large torx screw driver, remove spindle anti clockwise by locking out fan at base. for all Robot coupe parts go to http://www.catering-machines.com/

Cindy,
Send me your e-mail & I will send you back an exploded view of your Robot-Coupe. It will give all the info needed. [email protected]

Hi,

What kind of machine is it?

3BX9k4 PLEASE DESCRIBE IN BRIEF WHAT THE PROBLEM IS?