I want to know how to get the perfect picture on my TH-55AS740A TV ?

The set uses two boards to drive the screen --one for each half or side.

Different names are used like sustain or in LCD sets inverter.

Best way to set is watch a program with lots of human faces; then adjust the color and contrast for most human like picture and the rest will become more perfect. There is usually no factory adjustment listed in the manual. But you can download the manual online and check it if you wanted to do so.

Hi,
Y sus problem with your TV. You need a basic tv knowledges to repair it yourselves. Regards

poor contact in the vedio connector , open the cover and rmove it , clean the connector and reinstall again

Hi,

The Settings are :-

-Picture menu Picture mode: Custom
Picture: +80
Brightness: +60
Color: +44
Tint: -8
Sharpness: 0
Color temp: Warm
Color management: On
x.v.Color: Off
Zoom adjust: [grayed out]
-Advanced picture submenu
Video NR: On
3D Y/C filter: [grayed out]
Color matrix: [grayed out]
MPEG NR: [grayed out]
Black level: Light


Let me know, if needed further assistance.


Hope i helped you.


Thanks for using ' Fixya ' and have a nice day!!

satelliteand cable TV is only comes in black and white.
this a HTML type plug or a coaxial
select menu and source
very weird... should default to colour

if no luck try plugging in a desk top digital box tune using that

TH-42PX20 TH-50PX20 Operating Instructions High Definition Plasma ...

ftp://ftp.panasonic.com/television/om/th-42px20_en_om.pdf

Can't say it's a fix but when you press the tv button to make the picture better, cover the end of the remote and press sky so the tv and box don't pick it up.

It's more of a work around than a fix!

i got th e tv running again. i just unplug it for a long time and after pluging it again, it runs perfectly. problem no happen again sense then.
thanks

cheak cables what cables uusing ? thx nick