Good picture on tv, but screen is so dark its light looking thru dark smoke
SOURCE: tv picture is too dark- worked with contrast and
This sounds like low screen voltage(A1)try adjusting the a1 voltage bottom control on flyback transformer if you have a voltmeter, voltage on crt base possible market screen or A1 shoud be beteen 350/500 volts when making adjustment remember to take into account current taken by meter If voaltage will not adjust flyback transformer will have to replaced
SOURCE: well the picture lost light and it all looks
Try replaceing the projection lamp, or you may have a light engine failure. Good luck !
Testimonial: "good help, this guy knows whats up"
SOURCE: tv is dark
looking on the back of ur tv near the cable input jack there might be an area where u can adjust the brightness on the flyback transformer. if there isn't you will have to remove the back of the tv and adjust it this way. PLEASE DO NOT TOUCH ANYTHING OTHER THAN THE BRIGHTNESS KNOB ON THE FLYBACK, CAUSE YOU MAY BE SHOCKED. so please be careful.
1,308 views
Usually answered in minutes!
×