Is there any way to change Hz from 50Hz to 60Hz.

Lots of places :>)

KENOWA TRUE LIFE 26uF MFD 450V 500VAC 50/60HZ ...

picclick.com > ... > Parts & Accessories > Other

Product Description: Premium UL Listed Metalized Polypropylene Film (MKP) 26uF 450VAC 50/60 Hz Generator Capacitor AVR for Kenowa & TrueLife Branded ...

generator capacitor - Amazon.com

www.amazon.com > generator-capacitor

Results 1 - 16 of 667 - POWER PRODUCTS CBB61 Generator Capacitor 35uF 34uF 32uF 400VAC 450VAC 50/60 Hz 40/85/21 SH. 5.0 out of 5 stars 5.

Kenowa True Life 26uF MFD 450V 500VAC 50/60HZ ... - eBay

www.ebay.com > ... > Parts & Accessories > Other

Product Description: Premium UL Listed Metalized Polypropylene Film (MKP) 26uF 450VAC 50/60 Hz Generator Capacitor AVR for Kenowa & TrueLife Branded ...

Universal 26uF MFD 300V 350V 450VAC 500V 50/60Hz Generator ...

www.cafr.ebay.ca > ... > Other

Translate this page Universal 26uF MFD 300V 350V 450VAC 500V 50/60Hz Generator Capacitor ... Capacitor CBB61 CBB60 36uF 35uF 33uF 31uF 400V 450VAC 50 Hz 60 Hz ...

capacitor 26 uf in Automotive ' eBay

www.ebay.ca > sch

Find capacitor 26 uf from a vast selection of Automotive. Get great ... Kenowa True Life 26uF MFD 450V 500VAC 50/60HZ Generator Capacitor AVR ... JKD CBB61 45uF 42uF 40uF 38uF 36uF 450V AC 50Hz 60 Hz Generator Capacitor AVR.

It be better to obtain an unit that already design for your area as it will the appropriate electrical outlets.

As for the 30552-00 would be 60 Hz with running at a governed speed of 3600 (3750 unloaded).

Being a two pole generator frequency is determined by dividing engine as follows. 3600 / 60=60. Engine is RPM is in minutes and must converted to seconds. For 50Hz operation the engine speed must be reduce to 3000 rpm (50hz * 60seconds = 3000 rpm)

6260 isn't a model number for any Ingersoll Rand generator.

Generally, though, if you have a generator that generates 50Hz and you want it to produce 60Hz instead, you adjust the governor to increase engine running speed by 20%... if the engine will tolerate that speed. The first thing you need to do is find out what speed the engine runs when it's under normal load. If that speed can't safely be increased 20%, then the generator head has been built strictly for 50Hz and there's nothing you can do about it except run a UPS between the generator and your load.

If the engine speed IS low enough to safely increase by 20%, then that's what you do.

what frequency does Jordon use on their power is it 50 hz are the clocks 60 Hz designed power usage.
may need a device to convert 50hz to 60hz
search google for
50 hz to 60hz frequency converter

It will do it itself. If you were to play a PAL video through it at 50Hz, it will be fine and if you play an NTSC in simple PAL it will be at 60Hz and display a reasonable picture.
Hope that helps.

If it was built for 60Hz AC power (American), it will not work on 50Hz power. The Hz, is the number of cycles per second, the electricity makes. If your motor & controls are wired for 60cycles, they will not get the proper electrical supple to work on 50 cycles. AC voltage goes from neutral to positive to neutral to negative to neutral, (one cycle) according to the country you are in. Some countries also use 230 or 240 volts, instead of 120 volts.

50Hz and 60Hz is frequency of AC power supply. If you are in usa, select 60Hz and if in uk, select 50Hz to avoid flickers of florescent tube lights in picture.

best to call customer service 800-877-5032. if under a warranty would not want to lose it.

No need to worry about that. The direct drive on these turntables will adjust for hz setting automatically.

Hi, Your idea is basically sound and should work as long as the UPS originally is designed to produce 240V 60Hz and has its own built in timebase. The reason is that the input as long as the voltage matches makes no difference (50 or 60 Hz). By design, the UPS converts the input voltage to DC to charge the internal battery. The battery then powers an electronic circuitry that produces the 240V 60Hz. The input is then isolated from the output in terms of frequency. This is a common design, however, there are some (not many) that uses for its local oscillation sampling from the source and therefore will replicate the input frequency to its output, but very rare; it's better that you know they exist. Hope this be of some help/idea. Post back how things turn up or should you need further information. Good luck and kind regards. P.S. The only problem with 50 and 60 Hz is heat buildup which is tolerable and still within safe parameters. The only time the 50/60 HZ makes a big difference is when motors are used, timers such as in the early designs of microwave ovens, washing machines, etc., pumps and other highly inductive consumers. Most electronic devices converts the AC input to DC and therefore the frequency has negligible effect. Of course others may see it differently.