HOW DO IDISCONNECT ALARM IN 1997 TOYOTA 4RUNNER

In the link

https://www.google.com/search?q=1997+toyota+4runner+2.7.+Head+bolt+torque+sequence

..

Reset the alarm. You can look up how on this model online or go by any Toyota dealer and they will do it for free. It takes them two seconds. Don't let them tell you otherwise. I work there for 15 years. I don't remember this exact model, but there is either a switch on the drivers kick panel or it is a sequence of buttons that you pouch on the remote.

Did you try a new key? The security system also reads off the key. Get it from the dealer. Will need vin number.

You have a 3rd generation 4runner. A second generation 4runner parts will not work on yours. You need 3rd gen parts. Although I have a second gen 4runner. Most of your parts will work on my truck. Trying to do what your asking is next to impossible without some custom fabrication

if they look identical in every way

On this website (link below) you find fuse box diagram and description for Toyota 4Runner (1996 - 1997)

Toyota 4Runner Third Generation N180 1996 1997 fuse box diagram Auto Genius

remove the after market alarm ,they always cause problems ,made in china and the chips used are not the same as philips or a bosch chip ,you could try by passing teh kill switch by joining the wires together

lock your doors and close it wait till alarm resets and then unlock door with key and this should take care of you problem

you have to call tyota and thet have to send you a new computer

For a V6 # Liter engine, you will use a galon and almost half (that is about 6 Liters of oil). I use a Toyota camry V6 3 Liter engine that shares the same engine with the Toyota 4Runner.

Rate this Fixya!