After I did re installed vista the windows update wont work I get a Error 8024A000 I have tried everything on forums and when I open IE it gives me a abort message say needs to be updated to IE 9 but I cannot do that with the Windows update not working. I tried all the cmd the forums advised, I tryed to install the SP2 but it will not let me do that. I tried the Fix it under Microsoft and it aborts something about the powershell. If anyone cant please help about the code 8024A000. Thank You
Try updating your hard disk drive driver see:
Vista Windows Update Error 8024A000
Here's the solution. I had to replace a failed hard drive in a Vista laptop. The original drive was a 200GB and I replaced it with a 500GB. I used my original Toshiba restoration CDs. I've spent HOURS troubleshooting this problem and I never would have guessed the solution -- it's the Intel Rapid Storage Technology Driver. It has to be updated because of the larger drive.
Here's a link to an HP support site for the updated driver. You can also find the update on Intel's site.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02219204&cc=nl&lc=en&dlc=en&product
If you're looking for fixing your error windows update error 8024a000, then no worry our team will assist you to get the proper solution, you may solve from your side too just follow these steps:
Steps to Troubleshoot 8024A000 Windows Update Error
Step 1: Troubleshooter Mode
§Navigate to the Search bar section which will appear on the start menu or one can easily access it from the home screen section.
§The next step is to enter the "Troubleshooting" steps and select the Settings tap icon if necessary
Step 2: Reset the Windows update components on manual way
§Click on the Start icon and then hit the "All Programs" option. Tap on the "Accessories" icon and then right-click on the 'Command Prompt' icon
§Select the "Run as Administrator" option.
§If you find that a notification has been received from the User Account Control icon then, simply hit on the "Continue" icon now.
Step 3: Restart the services for your Windows Update
§Hit on the Start icon and then click on "All Programs" icon. Next one needs to hit on the "Accessories" icon and right-click on the 'Command Prompt" icon
§Hit on the "Run as Administrator" icon next.
§If a user is again receiving a notification as "User Account Control" then, click Continue .
Still stuck to solve? Get help from this site: windows update error 8024a000
Toll-Free No: +1-888-633-7151
How To Fix 8024A000 Windows Update Error 1 877 760...
microsoftwindowssupportnumber.com
Tips to Fix 8024A000 Windows Update...
SOURCE: I.E. Cannot Display the Webpage. Due to Microsoft Update?
don't do any microsoft updates, just make sure your running the latest virus programs with the latest version virus definitions and dont' go to sites you shouldn't be going to and you'll never run into a problem. Microsoft updates are supposed to protect your computer from hackers but using a good virus program and using a different browser such as firefox or opera and you'll be good.
SOURCE: help to install xp windows sp2 instead vista please
hi
i have the problem with the windows installation
when i install the winxp then my laptop does not detect the HDD
plz help me to install the windows
tell me how can i solve that problem
SOURCE: Explorer 7
i think there is two cause 1/ your camera 's driver is not stall properly re install it. 2 there is not install usb 2.0 driver. which support usb hardware as usb camer /usb modeam etc . 3/ your camera now out of work ---thanks
SOURCE: reinstalling with recovery cd says wrong machine.
I think your Satellite M30 hard disc dead or your CD-driver cant work.
SOURCE: I was using windows vista on Toshiba Laptop. I got
Please note before I continue on that XP can not always be placed onto a system that had Vista as some drivers and hardware will refuse to work.
You may be having an issue w/ the boot manager.
I would suggest running the windows xp recovery console this will give you a dos like screen. Once there you can do a lot w/ the system I would suggest trying to rebuild the bootmanager.
If none of this works. You should try a full not a quick format off the install screens or you can run a win98 boot disk and access the partition and format commands.
Please post your findings in as great of detail as possible.
I believe at this time the bootmanager may be confused as to if its dealing w/ visita or if its dealing w/ xp. The boot manager uses a part of the harddrive outside of normal storage to control parts of the OS loading procedures.
Thanks
Frank
Live-Tech
1-888-361-8511
http://www.mylive-tech.com.
To download and install the System Update Readiness Tool, follow the steps below:
1. Click Start
Collapse the imageExpand this image
, and click Control Panel.
2. If you use Windows 7, click System and Security. If you use Windows Vista, click Security.
3. Under Windows Update, click Check for updates.
4. The System Update Readiness Tool (KB947821) is offered, only when
5.
Click Install updates.
hope this helps
189 views
Usually answered in minutes!
×