Tecra s10 display brightness

check power saving setting.

check out this link u will find ur display driver
http://driverscollection.com/?H=Tecra M1&By=Toshiba&dpage=7

just move the screen by opening it more or closeing it more this will change the brightness.
hope this helps.

The brightness is automatically controlled by a "Brightness Sensor" However, you can compensate the brightness by using the Toshiba Brightness Sensor Control. In order to use this utility, you must set the Brightness Sensor in Toshiba Power Saver to "ON"

press ESC several times at the screen when you power on then a screen will appear press F1 and there you are .....

Two things to try, install service pack 3 for xp, and go to the Toshiba website look up your laptop and see if they fave drivers that are compatible with xp sp2 or sp3. Hope you find what you looking for and this info helps. GL

Normally there's a Function button (Fn) and you can use that in conjunction with the brightness buttons on the keyboard (looks like a sun on most)

yes brightness could be increse go the manual of toshiba...actually ON Battry Mode brightness will decrease because for better consuption of battery for long hour. you can increse brightness in it... chk go to the control panel and then go to battery and power option...then change the setting acoordingly...

Yes, it should run WinXP. The minimum system requirements to run both Windows XP Home and Professional are 233Mhz, 64Mb RAM and 1.5GB hard drive space. I have a Toshiba Tecra 8000 that still runs XP, a little slow, but has run smoothly for 5 years.

The setupdd.sys error is most likely a due to a defective hardware like RAM. Try installing only one ram if you have two to see if either one is defective; it should work for most users.

Click Here. Select your model from the selection boxes to get your Windows XP drivers.