I have the front panel off...how do you open the round trap. Does it pull out or twist etc...?
SOURCE: How do I open the frond panel to clean the lint
on some models, what you need to do is open the back plate. should be about 10 quarter in screws. on other models, you would take the bottom kick-plate off by using a putty knife to puck in the 2 clips so they can release.
SOURCE: My Kenmore 60 series gas dryer will not heat up. I
Some dryers have a small inspection hole covered by a small platic cap.
Remove cap and look inside unit for pilot. Newer dryers have an igniter that glows when the dryer is turned on. It ignites the gas then goes out.
195 views
Usually answered in minutes!
×