I have a Pyramid SE301-VL 150 watt amplifier here, but I forgot to tag the wires when I removed it from the houseboat it was installed in... Trying to install it in my boat, but not sure of the wiring on it...
Wire colors are as follows:
1 black, appears to be ground connection
1 red, assuming batt + connection
1 grey
1 green
another black which has splitter on the end ???
Pairs:
Brown, brown/white
Blue, blue/white
Green, green/white
Grey, grey/white
Was connected to Motorolla professional series cassette deck, I intend to connect it to a Kenwood cassette deck on a 4 speaker system.
Any help/information you could provide would be greatly appreciated.
Thanks for your time.
Captain_Bill,
Red - should be fused & is the +12Vdc system supply voltage.
Chassis = System ground.
Individual Green, Grey, & cooresponding blacks will be the right & left chan Audio ins (Black = neg).
Paired bl/blwh, br/brwh, grey/grwh, & green/grwh will be the audio outs.
Hope this helps !!!!
Dale EE
Can imake it rca
542 views
Usually answered in minutes!
×