How to remove door to an integrated dishwasher

Question edited for clarity and spelling of 'integrated'.

This explains

https://www.justanswer.com/uk-appliance/83k9f-lamona-dishwasher-hj8630-need-replace-door.html

The videos are for a Kenmore, but they all work in a similar fashion.

usually a screw on the striker (the bit sticking out that goes into the door) it will be a slotted adjustment so just loosen (not remove) the screw and pull it out a mm or 2.
retighten and test.
Also, clean the seal. While your at it, the sump filters and spray arms.

how do i take door off to fix handle back on dishwasher

I have the same problem.I need to take off the door from the integrated dishwasher.I can see a possible screw on the either side of the door but difficult to visualise this to find out what kind of screw it is.
Can someone advise me regarding the method of take the door off the integrated dish washer.
Paul

this may work - if it is an integrated dishwasher you should have a star shaped screw attaching the door to the machine on either side (about half way down). try pulling the machine out - and then looking for the holes on either side at the front. insert a star screw driver (may not work with other screwdrivers) and release the bolts (screws) then slide the door upwards.

My Neff integrated dishwasher has two holding screws in the top corners and then two hidden screms half way down the side behind plastic covers. Loosen these side screws, remove the top two corner screws and then the door cover/panel should lift out of two lugs at the bottom.

there are some screws inside the door, around the edge. These would be the first to undo then I think the door would have o be pulled up slightly to relaease.

http://www.doityourself.com/scat/dishwasher

open the front door. On each side of the inside of the door are various long screws, unscrew these and the old door will fall off. discard the old door and follow the same steps in reverse to put the new door on. It took me 10 mins to do. Hope this helps