What is the correct oil capacity for this motorcycle? 1100cc

should the numbers match you should be able to substitute one for the other

That should be listed on the emissions sticker on the frame along with other details like idle speed, ect.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/oscar_403cc49e0f00cda7

The motor is based on the Honda 50/70/90 motor. I'm not certain of the oil capacity but I do know this- The dipstick is not screwed in to check the oil level. Unscrew it, wipe it and dip it into the crankcase (don't screw it in)for the correct oil reading. Honda states oil capacities of between .8 and 1.0 liters.Should be pretty close but don't overfill it.Good luck!

sounds like time for timing chain or do a motor flush from auto zone then change oil

For temperatures 50 degrees fahrenheit or less, use 4 stroke motorcycle oil 10w-30. For temps 50 and above use 10w-40. Pro Honda GN4, Honda 4-stroke Oil, or other equivalent motorcycle oils. Capacity is about 1 quart.

there is some room for adjustment, i think about 10 oz but the springs could be progressive and use different amount of oil...Call a honda dealer have them explain the difference including the reason for different weighs of oil, to help you set your suspension correct fo an air ride shock

Pour the correct quantity of oil into the slider tube.
Technical data Fork oil, capacity per fork leg
0.65 l Consumables/lubricants Hydraulic fluid SAE 10

look on the engine case nearest the dipstick for a "CC" designation...All quarts of oil show a "CC" measurement on their bottle...Use that designation on the engine and do the math to arrive at the capacity. You can use ANY oil you want within the correct weight ie: 15/40W. I'd recommend Shell Rotella Synthetic 15/40W about $5 qt at Walmart.
My best guess on capacity is near 1.8qts...Why not add 1.5 qts and check using the dipstick?
Good Luck

a complete fill after a rebuild is 3.6 litres, for an oil and filter change 3.1.