- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 5:31 www.youtube.com/watch?v=gRPG8D7Pa-U Dec 20, 2010 - Uploaded by Auto Parts Direct To You
How To Repair / Replace A Broken Or Stuck Shifter Shift HandleButton Knob On 2003-2006 Honda Accord .... How to Fix Your Loose Stick (manual shift stick) - Duration: 6:17. by Fixbook 165,139 views ... How to change a gear shifter light on a 2003honda accord - Duration: 4:04. by Joe Lester 46,291 ...
finesse! seriously, I'm the only one who can get my rodeo out of park... try pulling the shifter SLIGHTLY towards you and left BEFORE you push in the button. works everything's for me. good luck!
dude go to a parts store and get a printout for removal- replacement of a shifter linkage..then go to a salvage yard and get a used cable and shifter setup and put it in yourself if possible..its not that hard...
check the button that you push in on your shifter. will the shift button not go all the way back into the shifter like normal. can you pull it out toward the dash? be easy when doing so to keep from breaking it. something has broken inside the shifter and allows the button to come out too far. try sticking ur finger in the shifter behind the button and realign the button. the button should go all the way into the shifter when it is aligned. it's only a temporary fix but will get you home.
U need to pull the shift rails out and check them for wear, chances are they are in need of replacement, if u dn't know how to do this have a trans repair shop do it.
It may be the shifter lever bushing at the base of the shifter. To check you must remove the stick shift cover. With the stick exposed, push down and turn on the plate that holds the shifter shaft. It is spring loaded and may take some effort. ( Remove stick while in neutral) Pull the stick out of the trans where the stick shift pivots should be a rubber bushing about the size of a half dollar. I think you can only get this part at a Toyota dealer. Hope this helps !
The shifter cable and linkage may be getting sticky. Locate the linkage and cable on the gear selector (transmission side under hood) and spray them with some PB Blaster or WD 40.
The shifter button on the shifter is released when you start up your car and step on the brake pedal. If you are having an intermittent problem, you may be having a shifter release solenoid issue. the shift solenoid is part of the brake light switch system so the problem can also be in the brake switch. If you do not know how to check it out, I would bring it to a reputable repair shop and have them check it out for you.
×