How to assemble ls studio muslin b10n?\ - Kenwood Fp593 Fp680 Fp693 Fp720 Fp723 Fp733 Fp734 Fp735 Fp905 Upper Drive Belt

there is a wrench (by Vitamix) for under $10. you can get it from amazon. it makes the job of removing a blade assembly much easier.

Turn the cog in the base a little. Sometimes it gets misaligned.

Need special tool:

check here:

Amazon com vitamix wrench assembly Home Kitchen

Part of the blade assembly or drive socket assembly?...

check here:

Amazon com vitamix wrench assembly Home Kitchen

The jar assembly for the KSB540 is part W10503762. this is for the 48oz jar assembly. Here is a link to the product KitchenAid Blender Jar Assembly for KSB465

You can also use the 56oz jar on your blender, which is part number W10555711, here is a link to that product as well: KitchenAid Blade Jar Assembly W10555711

Make sure the blade assembly is put together in the correct order. The blade needs to go through the gasket so that the order is pitcher glass, gasket, and metal blade base. Then the final plastic cap threaded onto the pitcher. If the gasket is not between the pitcher and the metal blade assembly, you will have leaks.
Also, check the gasket to be sure it's not cracked and that it doesn't have residue on it.
I hope this helps. If it does, please come back and rate my suggestion!

There is probably a hairline fracture or tiny crack in the blade assembly itself - replace the blade assembly - it will automatically come with a gasket, so you will have an extra.

Got the blade assembly make me an offer! Contact me at [email protected] .
Andrea

You can call Waring and they can send you a parts breakdown showing the order the parts need to be in. If you still have problems they can go over the assembly with you on the phone or direct you to a service center near you to help.

Most probably find a Oster parts manual here. Just send them a search request.