Whirlpool LXR6232EQ Top Load Washer - no cold water on the cold/cold or warm/cold wash cycle settings, nothing on cold/cold, and only hot on warm/cold?? Replaced water inlet valve and the temperature control switch, still have the problem, checked hoses and they're find....help..........
SOURCE: Whirlpool ghw9100lw2 front load washer doesn't use both hot and cold
first make sure the hoses aren't reversed hot on cold or cold on hot next turn off cold water remove the hose from the washer and check to see if the screen on the washer is clogged if not get a bucket turn on cold water and see how strong the water is then let me know what you find dont rate me till we are done
SOURCE: Maytag performa washer hot water runs continuously
Littleone.. please check your instructions.. some washers now dont need Hot water connection to them...they heat their own as part of the efficiency settings on the wash programmes themselves!
Regards Faggly
SOURCE: Whirlpool model LSR7233EZO / doesn't fill fully
The fill switch is a very sensitive device. You can test it by blowing into the tube, listen for the switch to click, or use an ohms tester. They are actually adjustble, the adjuster screw usually has glyptol (thread lock) on it. I would replace one before trusting an adjusted one.
SOURCE: hot water doesnt work, switch to warm and warm comes out.
If the cold works on cold wash but the hot don't work on hot wash . Then yes the switch is bad.give What model is it?
SOURCE: water temperature control not working
the fill hoses are backwards,,,reverse fill hoses...on the job...also your under warranty ..call for service but you can do it your self..
434 views
Usually answered in minutes!
Hi james cundall, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box? Have you verified that cold water comes out of the cold water hose when it's not connected to the washer? Maybe somebody closed a shut-off valve upstream.
×