Refrigerator wont cool. Flashing Indicator light indicate Termister Open. How do I fix this issue, do i have to change the thermister and is it easy to change? This unit is approx 10 year old. There was a loose connection wire in the 4pin connector which is located in the back of the top drawer, I had to finally remove the 4pin connector and directly wire it. The loose connection may have damaged the thermister. How do I fix this open thermister problem now, should I call for repair or is it easy to fix this problem?
SOURCE: U-line CO 2075 refrigerator stopped working, only
OK I'm guessing you have a clear icemaker. Not a co2075. When you replace the board you MUST replace the thermistors that come with the board. The board and thermistors are calibrated together. What is your model number? A clear ice maker has thermistors inside tubes. Except for the one on your filter dryer. Lets start with the correct model.
SOURCE: Open Thermistor on U-Line
It might be a bad thermistor. I would need the exact model number. It could be a open harness as well.
SOURCE: Uline 2075DWRRSS stopped working.
Sounds like you have found the source of your problem. Yes,tighten all wires and wrap them with a zip tie.
297 views
Usually answered in minutes!
×