My 24v cordless drill is working ok but the switch on the side of drill for turning hammer on and off is missing. what spare parts do i need to get. would it just be the switch hopefully nothing else fell out

CARBON BRUSHES for POWERBASE EXCEL ... - PicClick UK

https://picclick.co.uk > ... > Other Power Tools
CARBON BRUSHES for POWERBASE EXCEL EXCELL 1800W 210MM MITRE SAW PBXB18LSMS E77. £6.89 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee.

Solent Tools Spares For POWERBASE

https://solenttools.co.uk > Spare Parts
Select Your POWERBASE Model Number From The List Below, You Will Then Be Able To See The Spares, Parts And Accessories That We Have For It. ... 644940 (3) ...

PowerBase Spares ' eSpares

https://www.espares.co.uk > browse > powerbase
The online store for all your parts & accessories. It's easy with eSpares. Copyright © eSpares Ltd. All rights reserved 2004-2022.

POWERBASE EXCEL MODEL 785265 24V CORDLESS ...

https://www.ebay.co.uk > itm

Brand: Powerbase Excel ; Model: 785265 ; Voltage: 24 V ; Corded/ Cordless: Cordless ; Drill Type: Drill.
£15.00 · ‎In stock
Missing: 644940 ‎' Must include: 644940

if you open chuck all the way the drill bit should just fall out

the switch or motor is wired incorrectly. These parts are polarity sensitive. The smoking I would assume is from the old switch and now the rotation is reversed. Let me know if you need more assistance.

Hi!!

The hammerdrill function is set by the selector switch, the switch itself may look fine from the outside, but, if it is not switching functions, you should open the hammerdrill and check the switching mechanism, even if you don't have an idea of how it works, after a visual inspection to the switching mechanism, common sense will tell you what's wrong, it is actually pretty simple.

Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

turn it to hammer,if it is the temp.has to be warm they don't work to great in the cold

Hi , try and find proof of purchase ( receipt/credit card statement ) and contact your local Bosch service centre ,in most cases it will be repaired under warranty .
Hope this helps

go to ereplacementparts.com

The brushes come as an assembly with the spring and brush in one unit. If your springs are bad you can order a set of brushes. The part number is 2607034901 and they run around $6.50. If your springs are melted looking there may be an underlying problem with the motor, mainly that there is a short in the motor or even switch. If the brushes are just worn and not touching the commutator bars then it is safe to just replace the brush set and you should be ok. Any questions please post back.

you can but a replacement screw from the drill manufacture or you can take the old one out and buy one from a local hardwarwe store that sell drills> did this to a dewalt about a year ago then found out the ww graingers carries all the replacement parts for this brand so you might try wickes first.

make sure that in the speed selector you are fully on speed 1,2,or 3...sometimes you can fall inbetween and then it will do that...otherwise you may have overheated the drill and will need to deal with Grainger or another auth. Bosch dealer for warranty...if they don't fix you, buy a Hilti