Errow E12 on Bushnell - Bushnell Tour V2 Pinseeker Laser Rangefinder

I appreciate your inquiry, friend!
From what you have described your Electrolux washer is displaying an error code of "E12". An "E12" error code stands for a non-fatal reading or writing to the memory. This can be cleared with a reset and you can do that by unplugging the power cord for roughly ten minutes. If this does not resolve your issue it could be a possible problem with your control panel and that may need to be replaced. I hope this information is helpful. -Matt

Google.

my bushnell pro 1m slope will not read yardage at error 12

Bushnell says that it has to be returned and cannot be fixed just by doing a reset.

Looks like this link has got some solution for your problem...

http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/operation-could-not-be-completed-error-0x00000015/68244f52-b556-4b83-a9c9-926dc9098ae7

Good luck...

Hi,

CLICK HERE to see instruction to fix the 0x error

Regards,
Riztech

only code that is close ( e12) ( E12) look at display and make sure .. mm if the code is E12 then " CT oven:latch switch problem ) this may help Note E . 1 turn the clock selector knob to off 2 tweak the oven control by turning the clock selector slightly to the left ( counter clockwise ) this may stop the flashig message / beeping and clear the display window. " try it and pray mm .

the default security code is 12345.