At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
You can only disassemble the basic parts and no more. Use a toothpick and turn the rollers to dig out what you can. Do not force remove any parts as you will never get them to work properly again. Good Luck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most can be removed by gently inserting a screwdrive under the edge and popping off. If it does not pop off easily, do not force it and have an expert do it.
These clamps can be bought 2 ways, look for pasta machine clamp or craft clay roller clamp on eBay. The clay roller entire machine set is much cheaper than the pasta machine, but they have the same clamp.
These instructions are for the same machine. Himark was bought by Atlas Marcato. http://www.fantes.com/marcato.htmlThese instructions are for the same machine. Himark was bought by Atllas Marcato. http://www.fantes.com/marcato.html
Everything you could possibly want to know about these types of pasta makers are at this site. It will cover all hand-crank machines and is a wealth of info. http://www.fantes.com/marcato.html
I opened the rollers to the widest setting (Zero), and placed a folded business card between the rollers. I then turned the dial down so the rollers were "pinching" the card, and while keeping tension on the dial to gently squeeze the card, I gently shook the handle for a few seconds and it came out!
×