Hotpoint washing machine aquarius super silent wf620

Possible that there is no INLET pressure or water flow to the machine, check the inlet filter and valve, check for good flow to the valve if the hose is disconnected. If not it needs to be checked if the panel board is showing error due to memory fault..

• to de- activate press and hold the start/cancel button untill all the lights come on.
• then press and hold the on/off and start/cancel buttons together until d-off appears

that should do it and if not get back to me, there is another way you can do it.

Hello
F 13 is a fault code for water supply,inlet valve or hose connections.

You may try unplugging the machine and plugging back in to reset.

hold both buttons in until dsiplay clears

I think you mean code H20, if so it means no water coming in, check water turned on ,check hose(s), check filter in inlet valve is clean, check water pressure is sufficient.
Plz rate my solution.
Thanks.

to removed test display press and hold start/cancel button for 5 secs. then press on/off and start/cancel together until d-off is displayed then machine will work

I have a ultima WMD940 won't drain and comes up code F05. Please can you help my washing is piling up

This is a plumbing error and not a machine error. H20 means "water turned off or valve faulty"

Try pressing the "on" and "start" button together for over 5 seconds..............or till the display vanishes. You will tell me the result...............vote too.

This works

To exit the TEST mode, press and hold down the "Start/Cancel" button until ALL of the console lights light up. Press both "Start/Cancel" and On/Off buttons simultaneously until " dOFF " appears in the display. The default setting will now appear and the machine can be used normally.