My new compter wont requignize my sanza fuse

slide off button up and for 15 to 20 seconds

Press and hold for 20 seconds the ON and PLAY (>||) buttons at the same time.

Almost same as with the any sanza mp3 player

but instead of Sanza Media Converter you need Media Converter for Philips
1) download "Media Converter for Philips"
2) install the download
3) sync your Philips gogear with your computer
4) load "Media Converter for Philips"
5) Drag videos to the converter
6) click convert

the videos will automatically be transferred to your gogear in from there

You could try a reset?
Press and hold for 20 seconds the ON and PLAY (>||) buttons at the same time.

http://sandisk.com/sandisk-support/driver-download-wizard

you will have to enter the model number and prob the operating system you have on your computer but this should have everything you need

did you try to connect from your sanza to onboard usb don't use the front of your pc usb maybe wrong setup or wrong connecting the wire . use the usb located at back of your pc , if you connect the sanza to you pc if have words appear ( found hardware)it mean the sanza need the software driver and you unable to detect without driver..

Try going to the SanDisk website and download the drivers and run the install from their site. Then you don't need the small CD disc.

Try re-installing the drivers for the MP3 player FIRST then plug in the MP3 player! Also make sure you have the lates Windows media Player installed

same thing happen to me! I did a hard reset (hold the power button for 10-15 sec) waited a few seconds, then tried to turn it on -- it worked for me. good luck!

i just got it turned back on what i did i got an 8gb i dont think it will make a difference tho but all i did was push the power button up very fast like a flick and it turned on maybe ty it a few times and it will start hope i helped



[email protected]